HIKROBOT MV-CA020-10UC — Area Scan Cameras
2 MP, Sony IMX430, USB3.0, Color, 89.1 fps
The MV-CA020-10UC pairs the same 89.1 fps and 75.4 dB dynamic range as its mono sibling MV-CA020-10UM with a color sensor instead. Built on the IMX430 at 1624×1240 over USB3.0, it targets lines that need color information at high speed rather than mono contrast alone. This model is part of HIKROBOT’s Delisting Preparation list.
It draws typ. 3.9 W @5 VDC from the USB3.0 bus, with 9–24 VDC external power also supported. The I/O set and M2 cable-retention screws match the UM model, and hardware triggering, software triggering and free-run mode are all available. Its pixel-format list — Bayer RG 8/10/12, YUV422 and RGB/BGR 8 — gives flexibility in color processing, and USB3 Vision/GenICam compliance runs it under MVS or third-party software. The housing is 29×29×30 mm at 80 g.
Specifications
| CA Series — Area Scan | |
|---|---|
| Model | MV-CA020-10UC |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX430 |
| Pixel size | 4.5 μm × 4.5 μm |
| Sensor size | 1/1.7″ |
| Resolution | 1624 × 1240 |
| Max. frame rate | 89.1 fps @ 1624 × 1240 |
| Dynamic range | 75.4 dB |
| SNR | 40 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | 1 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono | Color |
| Pixel format | Mono 8/10/12, Bayer RG 8/10/10p/12/12p, YUV422Packed, YUV422_YUYV_Packed, RGB 8, BGR 8 |
| Binning | Not support |
| Decimation | Supports 1 × 1, 2 × 2 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | USB3.0, compatible with USB2.0 |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1(Line 1), and bi-directional non-isolated I/O × 1 (Line 2) |
| Power supply | 9 VDC to 24 VDC, supports USB3.0 power supply |
| Power consumption | Typ. 3.9 W@5 VDC (USB3.0 provides power supply) |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 80 g (0.2 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with USB3 Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | USB3 Vision, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000025424 |
| Status | Being discontinued |
Key features
- Supports auto and manual adjustment for gain, exposure control, LUT, Gamma correction, etc.
- Supports hardware triggering, software triggering and free run mode.
- Adopts M2 screw holes for securing cable that connects USB3.0 interface.
- Compatible with USB3 Vision Protocol, GenICam Standard, and the third-party software based on these protocol and standard.
Where it is used
This model fits applications that need color and speed together — color-based product sorting, print/label verification on fast lines, or tracking color-coded parts. The 89.1 fps rate means color decisions can be made without dropped frames even on quick-moving conveyors.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data