HIKROBOT MV-CA020-10UM — Area Scan Cameras
2 MP, Sony IMX430, USB3.0, Mono, 89.1 fps
Running the same 1624×1240 IMX430 sensor over USB3.0, the MV-CA020-10UM reaches 89.1 fps — the highest frame rate of the ten models covered here — with a mono output and a 75.4 dB dynamic range, also the family’s best. That pairing makes it the one to reach for when a scene has both low-light detail and strong highlights to resolve. HIKROBOT lists this series under Delisting Preparation.
Power is drawn from the USB3.0 bus itself (typ. 3.2 W @5 VDC), with 9–24 VDC external supply also available; the same 6-pin Hirose I/O set (one opto-isolated input, one output, one bi-directional line) carries over. M2 screw holes secure the USB3.0 cable, and hardware triggering, software triggering and free-run mode are all supported. USB3 Vision and GenICam compliance let it run under the MVS client or third-party machine-vision software; the body measures 29×29×30 mm at 80 g.
Specifications
| CA Series — Area Scan | |
|---|---|
| Model | MV-CA020-10UM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX430 |
| Pixel size | 4.5 μm × 4.5 μm |
| Sensor size | 1/1.7″ |
| Resolution | 1624 × 1240 |
| Max. frame rate | 89.1 fps @ 1624 × 1240 |
| Dynamic range | 75.4 dB |
| SNR | 40 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | 1 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Not support |
| Decimation | Supports 1 × 1, 2 × 2 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | USB3.0, compatible with USB2.0 |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1(Line 1), and bi-directional non-isolated I/O × 1 (Line 2) |
| Power supply | 9 VDC to 24 VDC, supports USB3.0 power supply |
| Power consumption | Typ. 3.2 W@5 VDC (USB3.0 provides power supply) |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 80 g (0.2 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with USB3 Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | USB3 Vision, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000025425 |
| Status | Being discontinued |
Key features
- Supports auto and manual adjustment for gain, exposure control, LUT, Gamma correction, etc.
- Supports hardware triggering, software triggering and free run mode.
- Adopts M2 screw holes for securing cable that connects USB3.0 interface.
- Compatible with USB3 Vision Protocol, GenICam Standard, and the third-party software based on these protocol and standard.
Where it is used
At 89.1 fps this camera is well suited to presence, position and counting checks on fast-moving lines, while the mono sensor and wide dynamic range help with edge and pattern detection in stations where lighting varies. Its compact USB3.0 body also fits easily onto robot end-effectors or space-constrained mounts.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data