HIKROBOT MV-CA020-10GM — Area Scan Cameras
2 MP, Sony IMX430, GigE, Mono, 60 fps
The MV-CA020-10GM is the 2 MP GigE model in the CA series; the Sony IMX430 sensor, with a 4.5 μm pixel on a 1/1.7″ sensor, delivers 60 fps at 1624 × 1240. Its 43.8 dB SNR stands out as the highest signal-to-noise figure among the CA models covered in this brief, and combined with a 72.08 dB dynamic range it supports cleaner image output. The model is listed under ‘Delisting Preparation’ status in HIKROBOT’s catalog.
The GigE interface runs up to 100 meters without a relay and stays compatible with Fast Ethernet; a 6-pin Hirose connector carries 9-24 VDC / PoE power along with the opto-isolated I/O set. Up to 128 MB of onboard memory supports burst transmission and retransmission, preserving image integrity under network load. GigE Vision V2.0 / GenICam compliance eases integration with MVS and third-party software.
Specifications
| CA Series — Area Scan | |
|---|---|
| Model | MV-CA020-10GM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX430 |
| Pixel size | 4.5 μm × 4.5 μm |
| Sensor size | 1/1.7″ |
| Resolution | 1624 × 1240 |
| Max. frame rate | 60 fps @ 1624 × 1240 |
| Dynamic range | 72.08 dB |
| SNR | 43.8 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | 1 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Supports 1 × 1, 2 × 2 |
| Decimation | Supports 1 × 1, 2 × 2 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Image buffer | 128 MB |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 3.27 W@12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 68 g (0.15 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000025445 |
| Status | Being discontinued |
Key features
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Supports auto and manual adjustment for exposure control, LUT, Gamma correction, etc.
- Up to 128 MB local memory for burst transmission and retransmission.
- Supports hardware trigger, software trigger, etc.
- Compatible with GigE Vision Protocol V2.0, GenICam Standard, and third-party software based on these protocol and standard.
Where it is used
The combination of high SNR and 2 MP resolution can give distinguishing results in applications where measurement precision matters, such as dimensional measurement and PCB/electronic-component inspection. A 60 fps rate is sufficient for mid-speed lines that need detail more than extreme speed. Single-cable PoE setup also simplifies camera mounting at measurement stations.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data