HIKROBOT MV-CE200-10UM — Area Scan Cameras
20 MP, Sony IMX183, USB3.0, Mono, 19.2 fps
The MV-CE200-10UM sits among the highest-resolution models in the CE Series USB3.0 line: its 1″ Sony IMX183 sensor with 2.4 μm pixels delivers 5472×3648 (20 MP) mono images at up to 19.2 fps, with a 41.5 dB SNR that is higher than the smaller-sensor models in the family. HIKROBOT has also flagged this model as ‘Delisting Preparation’.
It offers a USB2.0-compatible USB3.0 interface with either 12 VDC external power or power over the USB3.0 line (typ. 2.83 W). The same 6-pin Hirose I/O connector provides opto-isolated input/output and a bi-directional line for hardware and software triggering. At 44×29×59 mm, the housing is longer than the 29×29×30 mm models to accommodate the larger sensor behind the higher resolution; C-mount lens interface and USB3 Vision/GenICam compliance are retained.
Specifications
| CE Series — Economical Area Scan | |
|---|---|
| Model | MV-CE200-10UM |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX183 |
| Pixel size | 2.4 μm × 2.4 μm |
| Sensor size | 1″ |
| Resolution | 5472 × 3648 |
| Max. frame rate | 19.2 fps @ 5472 × 3648 |
| Dynamic range | 65.5 dB |
| SNR | 41.5 dB |
| Gain | 0 dB to 20 dB |
| Exposure time | 28 μs to 0.7 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports Global Reset and Rolling |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal reverse image output |
| Image buffer | 128 MB |
| Electrical feature | |
| Data interface | USB3.0, compatible with USB2.0 |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1(Line 1), bi-directional non-isolated I/O × 1 (Line 2) |
| Power supply | 12 VDC, supports USB3.0 power supply |
| Power consumption | Typ. 2.83 W @ 5 VDC (USB3.0 provides power supply) |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 44 mm × 29 mm × 59 mm (1.7″ × 1.1″ × 2.3″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with USB3.0 Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | USB3 Vision, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000025489 |
| Status | Being discontinued |
Key features
- Supports auto and manual adjustment for gain, exposure control, LUT, Gamma correction, etc.
- Supports hardware triggering, software triggering and free run mode.
- Adopts M2 screw holes for securing cable that connects USB3.0 interface.
- Compatible with USB3 Vision Protocol, GenICam Standard, and the third-party software based on these protocol and standard.
Where it is used
The 20 MP resolution and 1″ sensor size suit applications that need fine detail across a wide field of view, such as semiconductor/PCB inspection, precision dimensional measurement, and large panel or material surface inspection. Its 19.2 fps rate fits stations dominated by high-resolution single-frame capture rather than very high-speed lines.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data