HIKROBOT MV-CE120-10UC — Area Scan Cameras

12 MP, Sony IMX226, USB3.0, Color, 31.9 fps

HIKROBOT MV-CE120-10UC

Status: Being discontinued

HIKROBOT part no.: SM000025486

Request a quote and stock check

The MV-CE120-10UC is the color counterpart to the MV-CE120-10UM within the same CE Series USB3.0 family, sharing the 1/1.7″ Sony IMX226 sensor at 4000×3036 resolution with 40.5 dB SNR and 70.5 dB dynamic range. Its wide pixel-format support — Bayer RG, YUV422 and RGB8/BGR8 among others — lets it output color data directly rather than raw mono. This model is likewise marked ‘Delisting Preparation’ by HIKROBOT.

Interface and mechanics mirror the mono model: USB2.0-compatible USB3.0 connectivity, 9–24 VDC or USB3.0-line power (with a slightly higher typ. 3.42 W draw from color processing), the same I/O set on the 6-pin Hirose connector, and a C-mount lens interface. USB3 Vision and GenICam compliance let white-balance and color calibration be handled through the MVS client or third-party software.

Specifications

CE Series — Economical Area Scan
ModelMV-CE120-10UC
Performance
Sensor typeCMOS, rolling shutter
Sensor modelSony® IMX226
Pixel size1.85 μm × 1.85 μm
Sensor size1/1.7″
Resolution4000 × 3036
Max. frame rate31.9 fps @4000 × 3036
Dynamic range70.5 dB
SNR40.5 dB
Gain0 dB to 27 dB
Exposure time30 μs to 0.5 sec
Exposure modeOff/Once/Continuous exposure mode, supports Rolling and Global Reset
MonoColor
Pixel formatMono 8/10/12, Bayer RG 8/10/10p/12/12p, YUV422Packed, YUV422_YUYV_Packed, RGB 8, BGR 8
BinningNot support
DecimationNot support
Reverse imageSupports horizontal and vertical reverse image output
Image buffer128 MB
Electrical feature
Data interfaceUSB3.0, compatible with USB2.0
Digital I/O6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1(Line 1), and bi-directional non-isolated I/O × 1 (Line 2)
Power supply9 VDC to 24 VDC, USB3.0 power supply
Power consumptionTyp. 3.42 W@5 VDC
(USB3.0 provides power supply)
Mechanical
Lens mountC-mount
Dimension29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″)
WeightApprox. 80 g (0.2 lb.)
Ingress protectionIP30 (under proper lens installation and wiring)
TemperatureWorking temperature: 0 °C to 50 °C (32 °F to 122 °F)
Storage temperature: -30 °C to 70 °C (-22 °F to 158 °F)
Humidity20% to 80% RH, non-condensing
General
Client softwareMVS or third-party software meeting with USB3 Vision Protocol
Operating system32/64-bit Windows XP/7/10, 32/64-bit Linux and 64-bit MacOS
CompatibilityUSB3 Vision, GenICam
CertificationCE, FCC, RoHS, KC
HIKROBOT part no.SM000025486
StatusBeing discontinued

Key features

  • Supports auto and manual adjustment for gain, exposure control, LUT, Gamma correction, etc.
  • Supports hardware triggering, software triggering and free run mode.
  • Adopts M2 screw holes for securing cable that connects USB3.0 interface.
  • Compatible with USB3 Vision Protocol, GenICam Standard, and the third-party software based on these protocol and standard.

Where it is used

The color 12 MP resolution suits inline applications where color discrimination matters, such as reading color-coded labels on products/packaging, color-based sorting of produce or textiles, and print/color-consistency inspection. The same 31.9 fps as the mono variant supports triggered single-frame acquisition for these tasks.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.

Is this camera right for your application?

Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.

Request a quote Other models in the series

The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.

Source: HIKROBOT product data

← CE Series — Economical Area Scan