HIKROBOT MV-CE120-10GC — Area Scan Cameras
12 MP, Sony IMX226, GigE, Color, 9.6 fps
MV-CE120-10GC carries the same Sony IMX226 sensor, the same 4024×3036 resolution, 9.6 fps rate, and 40.5 dB SNR / 70.5 dB dynamic range as the MV-CE120-10GM, in color form. The added color-processing load raises typical power draw from 2.7 W to 3.0 W — making this the highest-resolution color model in the group. HIKROBOT also lists this model as ‘Delisting Preparation’.
Connectivity mirrors the mono model: up to 100 m of repeater-free GigE cabling, 12 VDC/PoE power through the 6-pin Hirose connector, the same I/O lines, and up to 128 MB of onboard memory for burst transmission. Bayer, YUV422, and RGB/BGR pixel-format support enables color data processing; GigE Vision V2.0 and GenICam compliance carry over unchanged.
Specifications
| CE Series — Economical Area Scan | |
|---|---|
| Model | MV-CE120-10GC |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX226 |
| Pixel size | 1.85 μm × 1.85 μm |
| Sensor size | 1/1.7″ |
| Resolution | 4024 × 3036 |
| Max. frame rate | 9.6 fps @ 4024 × 3036 |
| Dynamic range | 70.5 dB |
| SNR | 40.5 dB |
| Gain | 0 dB to 20 dB |
| Exposure time | 34 μs to 2 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports Global Reset |
| Mono | Color |
| Pixel format | Mono 8/10/12, Bayer GB 8/10/10p/12/12p, YUV422Packed, YUV422_YUYV_Packed, RGB 8, BGR 8 |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Not support |
| Reverse image | Supports horizontal and vertical reverse image output |
| Image buffer | 128 MB |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 12 VDC, supports PoE |
| Power consumption | Typ. 3.0 W@12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 68 g (0.15 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000025501 |
| Status | Being discontinued |
Key features
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Up to 128 MB local memory for burst transmission and retransmission.
- Supports auto exposure control, LUT, Gamma correction, etc.
- Supports hardware trigger, software trigger, etc.
- Compatible with GigE Vision Protocol V2.0, GenICam Standard, and third-party software based on these protocol and standard.
Where it is used
12 MP color resolution represents the top of this series for detail-critical color inspection — full-page multi-color print or label inspection, large-area color inspection of PCB and electronic components, or high-resolution color-based quality control.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data