HIKROBOT MV-CE120-10GM — Area Scan Cameras
12 MP, Sony IMX226, GigE, Mono, 9.6 fps
MV-CE120-10GM is the highest-resolution model in this fact sheet: a Sony IMX226 rolling shutter sensor delivers 12 MP mono images at 4024×3036, running at 9.6 fps. Its 1.85 μm pixel size on a 1/1.7″ format, together with 40.5 dB SNR / 70.5 dB dynamic range, gives it both higher resolution and stronger signal quality than the MV-CE100-30GC. HIKROBOT lists this model as ‘Delisting Preparation’.
The GigE interface supports cabling up to 100 m without a repeater; the 6-pin Hirose connector carries 12 VDC power or PoE, plus I/O (one opto-isolated input, one opto-isolated output, one bidirectional line). Up to 128 MB of onboard memory for burst transmission and retransmission supports reliable delivery of large 12 MP frames over the network. GigE Vision V2.0 and GenICam compliance integrate directly with the MVS client and third-party software.
Specifications
| CE Series — Economical Area Scan | |
|---|---|
| Model | MV-CE120-10GM |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX226 |
| Pixel size | 1.85 μm × 1.85 μm |
| Sensor size | 1/1.7″ |
| Resolution | 4024 × 3036 |
| Max. frame rate | 9.6 fps @ 4024 × 3036 |
| Dynamic range | 70.5 dB |
| SNR | 40.5 dB |
| Gain | 0 dB to 20 dB |
| Exposure time | 34 μs to 2 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports Global Reset |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Not support |
| Reverse image | Supports horizontal and vertical reverse image output |
| Image buffer | 128 MB |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 12 VDC, supports PoE |
| Power consumption | Typ. 2.7 W@12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 68 g (0.15 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000025502 |
| Status | Being discontinued |
Key features
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Up to 128 MB local memory for burst transmission and retransmission.
- Supports auto exposure control, LUT, Gamma correction, etc.
- Supports hardware trigger, software trigger, etc.
- Compatible with GigE Vision Protocol V2.0, GenICam Standard, and third-party software based on these protocol and standard.
Where it is used
12 MP mono resolution with a high 70.5 dB dynamic range fits precision applications where resolution matters most and line speed is moderate-to-low — high-accuracy dimensional measurement, PCB trace and solder inspection, and large-area pattern or text verification in electronics and precision manufacturing.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data