HIKROBOT MV-CE060-10UM — Area Scan Cameras
6 MP, Sony IMX178, USB3.0, Mono, 42.7 fps
MV-CE060-10UM is the mono model that brings the CE Series up to 6 MP with a Sony IMX178 rolling shutter sensor, reaching 42.7 fps at 3072×2048 while posting the highest signal quality in this lineup — 41.3 dB SNR and 71.3 dB dynamic range. A 2.4 μm pixel size on a 1/1.8″ format balances detail against speed. HIKROBOT lists this model as ‘Delisting Preparation’.
The USB3.0 (USB2.0-compatible) interface delivers power at 12 VDC, or directly from the USB3.0 bus, through the 6-pin Hirose connector, which also carries the I/O lines — one opto-isolated input, one opto-isolated output, one bidirectional line — on the same cable. M2 screw holes secure the cable connection. USB3 Vision and GenICam compliance work directly with the MVS client, with hardware trigger, software trigger, and free-run modes available.
Specifications
| CE Series — Economical Area Scan | |
|---|---|
| Model | MV-CE060-10UM |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX178 |
| Pixel size | 2.4 μm × 2.4 μm |
| Sensor size | 1/1.8″ |
| Resolution | 3072 × 2048 |
| Max. frame rate | 42.7 fps @ 3072 × 2048 |
| Dynamic range | 71.3 dB |
| SNR | 41.3 dB |
| Gain | 0 dB to 20 dB |
| Exposure time | 16 μs to 1 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports Global Reset, Trigger Rolling, and Rolling |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Supports 1 × 1, 2 × 2 |
| Decimation | Not support |
| Reverse image | Supports horizontal reverse image output |
| Image buffer | 128 MB |
| Electrical feature | |
| Data interface | USB3.0, compatible with USB2.0 |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1(Line 1), bi-directional non-isolated I/O × 1 (Line 2) |
| Power supply | 12 VDC, supports USB3.0 power supply |
| Power consumption | Typ. 2.7 W @ 5 VDC (USB3.0 provides power supply) |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 56 g (0.12 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with USB3.0 Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | USB3 Vision, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000025485 |
| Status | Being discontinued |
Key features
- Supports auto and manual adjustment for gain, exposure control, LUT, Gamma correction, etc.
- Supports hardware triggering, software triggering and free run mode.
- Adopts M2 screw holes for securing cable that connects USB3.0 interface.
- Compatible with USB3 Vision Protocol, GenICam Standard, and the third-party software based on these protocol and standard.
Where it is used
The high 71.3 dB dynamic range combined with 6 MP detail makes this model stand out in scenes with difficult contrast — bright or reflective metal surface inspection, PCB solder and component checks, and fine surface-defect detection — wherever mono imaging is sufficient.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data