HIKROBOT MV-CE013-80UM — Area Scan Cameras
1.3 MP, CMOS SS Sensor, USB3.0, Mono, 148 fps
MV-CE013-80UM pairs the same 1.3 MP global shutter sensor with a USB3.0 interface, and the bandwidth advantage shows: it reaches 148 fps at 1280×1024, roughly 65% faster than its GigE mono sibling (MV-CE013-80GM), while holding the same 40 dB SNR and 60 dB dynamic range. HIKROBOT also lists this model as ‘Delisting Preparation’.
The USB3.0 (USB2.0-compatible) connection carries power and I/O through a 6-pin P7 connector — one opto-isolated input, one opto-isolated output, one bidirectional line — and the camera can run on 12 VDC or draw power directly from the USB3.0 bus, removing the need for a separate power cable in many setups. M2 screw holes secure the USB cable, and at 29×29×30 mm / 56 g the housing is more compact than the GigE variant. USB3 Vision and GenICam compliance let it work directly with the MVS client.
Specifications
| CE Series — Economical Area Scan | |
|---|---|
| Model | MV-CE013-80UM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | SS |
| Pixel size | 4.0 μm × 4.0 μm |
| Sensor size | 1/2.7″ |
| Resolution | 1280 × 1024 |
| Max. frame rate | 148 fps @ 1280 × 1024 |
| Dynamic range | 60 dB |
| SNR | 40 dB |
| Gain | 0 dB to 20 dB |
| Exposure time | 30 μs to 1 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Not support |
| Decimation | Not support |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | USB3.0, compatible with USB2.0 |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1(Line 1), and bi-directional non-isolated I/O × 1 (Line 2) |
| Power supply | 12 VDC, supports USB3.0 power supply |
| Power consumption | Typ. 2.4 W @ 5 VDC (USB3.0 provides power supply) |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 56 g (0.12 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with USB3.0 Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | USB3 Vision, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | M000038279 |
| Status | Being discontinued |
Key features
- Supports auto and manual adjustment for gain, exposure control, LUT, Gamma correction, etc.
- Supports hardware triggering, software triggering and free run mode.
- Adopts M2 screw holes for securing cable that connects USB3.0 interface.
- Compatible with USB3 Vision Protocol, GenICam Standard, and the third-party software based on these protocol and standard.
Where it is used
Frame rates up to 148 fps make this the choice where GigE bandwidth would be the bottleneck for fast-moving objects — high-speed labeling, rapid part counting, or synchronized in-line inspection triggered at short intervals. Its compact housing also suits tight mounting spaces.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data