HIKROBOT MV-CB016-10GM-S — Area Scan Cameras

1.6 MP, Sony IMX296, GigE, Mono, 65.2 fps

HIKROBOT MV-CB016-10GM-S

Status: Available

HIKROBOT part no.: SM000039140

Request a quote and stock check

Moving up to 1440×1080, the MV-CB016-10GM-S trades some of the CB004 line’s frame rate for resolution: 65.2 fps versus 125.2 fps, on Sony’s IMX296 global-shutter sensor with a finer 3.45 µm pixel pitch (versus the IMX297’s 6.9 µm). SNR (41 dB) and dynamic range (74 dB) match the CB004 GigE mono model, so the extra resolution doesn’t cost image quality. As a CB-series board-level camera it has no housing — the PCB carries its own mounting holes and an M12 lens seat, and the exposed board must sit inside the customer’s own enclosure.

It shares the CB004 GigE cameras’ 100 m cable reach without a relay, 6-pin power/I/O connector (one non-isolated input, one output, one bidirectional line), and 9–24 VDC/PoE power, drawing a typical 2.6 W at 12 VDC. GigE Vision V2.0 and GenICam compliance keep it interoperable with MVS and compliant third-party vision software.

Specifications

CB Series — Board Level
ModelMV-CB016-10GM-S
Performance
Sensor typeCMOS, global shutter
Sensor modelSony® IMX296
Pixel size3.45 μm × 3.45 μm
Sensor size1/2.9″
Resolution1440 × 1080
Max. frame rate65.2 fps @1440 × 1080
Dynamic range74 dB
SNR41 dB
Gain0 dB to 24 dB
Exposure timeUltraShort exposure mode: 1 μs to 14 μs
Standard exposure mode: 15 μs to 10 sec
Exposure modeOff/ Once/ Continuous exposure mode
Mono/colorMono
Pixel formatMono 8/10/10p/12/12p
BinningSupports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4
DecimationSupports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4
Reverse imageSupports horizontal and vertical reverse image output
Electrical feature
Data interfaceGigabit Ethernet, compatible with Fast Ethernet
Digital I/O6-pin connector provides power and I/O, including non-isolated input × 1 (Line 0), non-isolated output × 1 (Line 1), and bi-directional non-isolated I/O × 1 (Line 2).
Power supply9 VDC to 24 VDC, supports PoE
Power consumptionTyp. 2.6 W@12 VDC
Mechanical
Lens mountM12-mount
Dimension29 mm × 29 mm × 30.2 mm (1.1″ × 1.1″ × 1.2″)
WeightApprox. 45 g (0.1 lb.)
TemperatureWorking temperature: 0 °C to 50 °C (32 °F to 122 °F)
Storage temperature: -30 °C to 70 °C (-22 °F to 158 °F)
Humidity20% to 80% RH, non-condensing
General
Client softwareMVS or third-party software meeting with GigE Vision Protocol
Operating system32/64-bit Windows XP/7/10, 32/64-bit Linux and 64-bit MacOS
CompatibilityGigE Vision V2.0, GenICam
CertificationCE, FCC, RoHS, KC
HIKROBOT part no.SM000039140
StatusAvailable

Key features

  • Supports auto or manual adjustment of gain, exposure time, white balance, manual adjustment of Gamma correction, LUT, Binning, etc.
  • Adopts noise reduction function to provide high-quality images.
  • Adopts GigE interface and max. transmission distance of 100 meters without relay.
  • Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.

Where it is used

The higher 1.6 MP resolution suits checks that need finer spatial detail than the 0.4 MP CB004 models can resolve — dimensional measurement, character/mark verification, or PCB and electronics inspection — while 65.2 fps still covers moderately fast lines, and PoE keeps cabling simple over the same 100 m GigE reach.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.

Is this camera right for your application?

Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.

Request a quote Other models in the series

The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.

Source: HIKROBOT product data

← CB Series — Board Level