HIKROBOT MV-CS200-10GM-ADV — Area Scan Cameras

The MV-CS200-10GM-ADV is a monochrome model that HIKROBOT lists as a 20 MP 1-inch CMOS GigE area scan camera; since the manufacturer’s sheet gives no separate explanation of the ADV suffix, this description relies solely on the values in the specification table. The IMX183 rolling-shutter CMOS in 1-inch format delivers 5472 × 3648 resolution with 2.4 μm × 2.4 μm pixels and reaches 5.9 fps at full frame; 41.5 dB SNR, 65.5 dB dynamic range and an exposure range of 46 μs to 2.5 s are among those values. Output is available in Mono 8/10/10p/12/12p and the model belongs to the GigE area scan group of the CS series.

For power and I/O this model specifies a 6-pin Hirose connector carrying Line 0 (opto-isolated input), Line 1 (opto-isolated output) and Line 2 (bi-directional non-isolated I/O). The GigE interface gives a 100-meter cable reach without a relay; power comes from 9 to 24 VDC or over PoE, with a typical draw of 2.4 W at 12 VDC. The C-Mount body measures 29 mm × 29 mm × 42 mm, weighs about 100 g and has mounting holes on four sides; the table lists IP40 protection, a –30 °C to 60 °C working and –30 °C to 70 °C storage range, GigE Vision V2.0 and GenICam compliance and CE, RoHS and KC certification. On the ISP side, CCM is supported together with auto or manual control of gain, exposure, white balance, LUT and Gamma.

Specifications

Key features

• Supports auto or manual adjustment of gain, exposure time, white balance, LUT, Gamma correction, etc.
• Supports multiple ISP functions like CCM to provide high-quality images.
• Compact design with mounting holes on panels for flexible mounting from 4 sides.
• Adopts GigE interface and max. transmission distance of 100 meters without relay.
• Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.

Where it is used

A 20 MP monochrome image at 5.9 fps full frame is suited to detail-hungry work at static or indexed stations: wear inspection on mold and tool surfaces, scratch and bubble detection on large display and glass panels, wide-field measurement of cast and forged parts. Hirose-connector cabling and PoE ease fixed installations where the camera on the machine reaches the control panel over long runs. Exposure up to 2.5 seconds makes it possible to pull contrast out of dim scenes inside a darkened enclosure.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.