HIKROBOT MV-CS200-10GM V5 — Area Scan Cameras
20 MP, Sony® IMX183, GigE, Mono, 5.9 fps
The MV-CS200-10GM V5 is a 20 MP monochrome GigE area scan camera built around the 1-inch Sony® IMX183 CMOS sensor, delivering 5472 × 3648 pixels at 5.9 fps. Its rolling-shutter sensor with 2.4 μm × 2.4 μm pixels pairs a 41.5 dB SNR with a 65.5 dB dynamic range, so bright and shaded regions of a wide scene survive in the same frame. Within the CS series small and medium resolution family it is the V5-designated GigE member of the 20 MP class, and an exposure window stretching from 46 μs to 2.5 seconds leaves room for long integration on dim, static scenes.
The Gigabit Ethernet interface (1000 Mbit/s, backward compatible with Fast Ethernet) allows cable runs of up to 100 meters without a repeater, and PoE support lets power and data share a single Ethernet cable; otherwise the camera accepts 9 to 24 VDC. The 6-pin P7 connector carries one opto-isolated input (Line 0), one opto-isolated output (Line 1) and one bi-directional non-isolated I/O (Line 2). With a typical draw of 1.5 W at 12 VDC, a 29 mm × 29 mm × 42 mm C-mount housing of roughly 100 g, mounting holes on four sides and GigE Vision V2.0 / GenICam compliance, it drops into existing third-party software and tight machine envelopes alike.
Specifications
| CS Series — Small & Medium Resolution | |
|---|---|
| Model | MV-CS200-10GM V5 |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX183 |
| Pixel size | 2.4 μm × 2.4 μm |
| Sensor size | 1″ |
| Resolution | 5472 × 3648 |
| Max. frame rate | 5.9 fps @ 5472 × 3648 Mono 8 5.9 fps @ 5472 × 3648 Bayer RG 8 |
| Dynamic range | 65.5 dB |
| SNR | 41.5 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | 46 μs to 2.5 sec |
| Exposure mode | Off/Once/Continuous exposure mode, and supports Rolling and Global Reset mode |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 1.5 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000086876 |
| Status | Available |
Key features
- Supports auto or manual adjustment of gain, exposure time, white balance, LUT, Gamma correction, etc.
- Supports multiple ISP functions like CCM and LSC to provide high-quality images.
- Compact design with mounting holes on panels for flexible mounting from 4 sides.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
20 MP monochrome resolution on a 1-inch sensor suits tasks where one frame must cover a large area in fine detail: solder and component checks on large PCB panels, surface-defect scanning of glass and display panels, dimensional measurement of sheet-metal and cut parts. The 5.9 fps rate fits stations where the product is stationary or moving slowly, while the long-exposure option helps with low-light archive and document imaging. The 100-meter GigE reach lets the camera sit at a line end far from the control cabinet.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data