HIKROBOT MV-CS120-60GM V5 — Area Scan Cameras
12 MP, Stacked BSI, GigE, Mono, 9.9 fps
The MV-CS120-60GM V5 brings a different sensor architecture to the CS series 12 MP GigE class: a 1/1.56-inch stacked BSI CMOS with 2.0 μm pixels. In this monochrome version the 4096 × 3024 frame reads out at 9.9 fps, backed by 38.9 dB SNR, 68.5 dB dynamic range, 0–24 dB gain and an exposure window from 53 μs to 1.9 s. Rolling-shutter readout and a typical 1.4 W draw at 12 VDC make it a measured balance for low-power stationary stations.
Its Gigabit Ethernet output allows cable runs up to 100 metres without a relay, stays compatible with Fast Ethernet infrastructure and, with PoE, removes the power cable altogether. The 6-pin P7 connector provides the 9–24 VDC input, an opto-isolated input (Line 0), an opto-isolated output (Line 1) and a bi-directional non-isolated Line 2; hardware and software triggering are supported. The 29 × 29 × 42 mm C-mount body weighs about 99.2 g and connects to standards-based software through GigE Vision V2.0 and GenICam. Working temperature is 0 °C to 50 °C.
Specifications
| CS Series — Small & Medium Resolution | |
|---|---|
| Model | MV-CS120-60GM V5 |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Stacked BSI |
| Pixel size | 2.0 μm × 2.0 μm |
| Sensor size | 1/1.56″ |
| Resolution | 4096 × 3024 |
| Max. frame rate | 9.9 fps @ 4096 × 3024 Mono 8 |
| Dynamic range | 68.5 dB |
| SNR | 38.9 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | 53 μs to 1.9 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 1.4 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 99.2 g (0.2 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000114775 |
| Status | Available |
Key features
- Provides optimized hardware design, stable performance, and low power consumption.
- Supports auto or manual adjustment of gain, exposure time, etc.
- Supports hardware triggers, software triggers, and anyway mode.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
A 4096 × 3024 frame covers a wide area in one shot for measurement and surface inspection: glass and panel surfaces, cut parts and electronic sub-assemblies are typical examples. Exposure up to 1.9 seconds helps in low-light scenes or where long integration is wanted. At 9.9 fps with a rolling shutter it should be paired with stations that hold the part still during the frame, and the 0–50 °C working range points to indoor, climate-controlled lines.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data