HIKROBOT MV-CS060-10GC V5 — Area Scan Cameras

6 MP, Sony IMX178, GigE, Color, 19.5 fps

HIKROBOT MV-CS060-10GC V5

Status: Available

HIKROBOT part no.: SM000104090

Request a quote and stock check

The MV-CS060-10GC V5 is the V5 edition of the CS series 6 MP color GigE camera, delivering 19.5 fps at 3072 × 2048 in Bayer RG 8. It operates at a typical 1.4 W at 12 VDC, and its 41.3 dB SNR and 71.3 dB dynamic range apply to the color output as well. The Sony® IMX178 rolling shutter CMOS sensor (1/1.8″, 2.4 μm pixels) is combined with CCM color correction and automatic or manual management of gain, exposure time, LUT and Gamma.

Whichever of the Bayer RG, YUV422Packed, YUV422_YUYV_Packed, RGB 8 or BGR 8 formats is selected, the data goes over 1000 Mbit/s Gigabit Ethernet, keeping compatibility with 100 Mbit/s Fast Ethernet and the 100-meter relay-free reach. Power comes via PoE or as 9–24 VDC through the 6-pin P7 connector, which also carries Line 0 (opto-isolated input), Line 1 (opto-isolated output) and Line 2 (bi-directional non-isolated). The 29 × 29 × 42 mm housing with four-sided mounting holes operates from –30 °C to 60 °C, and GigE Vision V2.0 and GenICam compliance keeps the camera open to third-party software.

Specifications

CS Series — Small & Medium Resolution
ModelMV-CS060-10GC V5
Performance
Sensor typeCMOS, rolling shutter
Pixel size2.4 μm × 2.4 μm
Sensor size1/1.8″
Resolution3072 × 2048
Exposure time25 μs to 2.5 sec
Gain0 dB to 24 dB
Mono/colorColor
Max. frame rate19.5 fps @ 3072 × 2048 Bayer RG 8
Pixel formatMono 8,
Bayer RG 8/10/10Packed/12/12Packed, YUV422Packed, YUV422_YUYV_Packed,
RGB 8, BGR 8
Sensor modelSony® IMX178
Dynamic range71.3 dB
SNR41.3 dB
Exposure modeOff/Once/Continuous exposure mode, and supports Global Reset
BinningSupports 1 × 1, 2 × 2, 4 × 4
DecimationSupports 1 × 1, 2 × 2, 4 × 4
Reverse imageSupports horizontal and vertical reverse image output
Electrical feature
Data interfaceGigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s)
Power supply9 VDC to 24 VDC, supports PoE
Digital I/O6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2).
Power consumptionTyp. 1.4 W @ 12 VDC
Mechanical
Dimension29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.2″)
WeightApprox. 100 g (0.22 lb.)
Ingress protectionIP40 (under proper lens installation and wiring)
TemperatureWorking temperature: –30 °C to 60 °C (–22 °F to 140 °F)
Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F)
Humidity20% RH to 95% RH (no condensation)
Lens mountC-mount
General
Client softwareMVS or third-party software meeting with GigE Vision Protocol
Operating system32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux
CompatibilityGigE Vision V2.0, GenICam
CertificationCE, RoHS, KC
HIKROBOT part no.SM000104090
StatusAvailable

Key features

  • Adopts brand new design to reduce power consumption.
  • Supports auto or manual adjustment of gain, exposure time, LUT, and Gamma correction, etc.
  • Supports CCM function to provide high-quality images.
  • Adopts GigE interface and max. transmission distance of 100 meters without relay.
  • Compact design with mounting holes on panels for flexible mounting from 4 sides.
  • Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.

Where it is used

Color 6 MP imaging with automatic exposure and gain control reduces manual calibration on mixed packaging lines where products of different colors and brightness follow one another. Fruit, vegetable and seed grading, cap and label color matching on cosmetics, and color-coded component verification in electronics assembly are typical uses. The PoE-powered, low-consumption design makes it easier to gather many color inspection points spread across the factory floor under a single switch.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.

Is this camera right for your application?

Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.

Request a quote Other models in the series

The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.

Source: HIKROBOT product data

← CS Series — Small & Medium Resolution