HIKROBOT MV-CS060-10GM — Area Scan Cameras
6 MP, Sony IMX178, GigE, Mono, 19.1 fps
The MV-CS060-10GM is the entry-level (Basic) monochrome GigE member of the 6 MP class within the CS series small and medium resolution family. Its 1/1.8″ Sony® IMX178 rolling shutter CMOS sensor delivers 3072 × 2048 pixels at a 2.4 μm pitch and runs at 19.1 fps at full resolution. With a 41.3 dB SNR, 71.5 dB dynamic range and an exposure window from 25 μs to 2.5 seconds, it produces balanced images in both bright and dim scenes.
The Gigabit Ethernet interface is backward compatible with Fast Ethernet and allows cable runs of up to 100 meters without a repeater; PoE support lets power and data share a single cable. The 6-pin Hirose connector carries one opto-isolated input (Line 0), one opto-isolated output (Line 1) and one bi-directional non-isolated I/O (Line 2), and typical consumption on a 9–24 VDC supply is 2.4 W. The 29 × 29 × 42 mm, roughly 100 g C-mount housing comes with mounting holes on four sides, and GigE Vision V2.0 / GenICam compliance means it works directly with third-party software built on those standards.
Specifications
| CS Series — Small & Medium Resolution | |
|---|---|
| Model | MV-CS060-10GM |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX178 |
| Pixel size | 2.4 μm × 2.4 μm |
| Sensor size | 1/1.8″ |
| Resolution | 3072 × 2048 |
| Max. frame rate | 19.1 fps @ 3072 × 2048 |
| SNR | 41.3 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | 25 μs to 2.5 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports Global Reset, Trigger Rolling, and Rolling |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Supports 1 × 1, 2 × 2 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 2.4 W@12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 100 g (0.22 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| EMVA data（typical） | |
| Quantum efficiency | 83.8% |
| Dark noise | 2.8 e-@10-bit |
| Signal-to-noise ratio | 41.2 dB |
| Saturation capacity | 13.9 ke- |
| Dynamic range | 71.5 dB |
| HIKROBOT part no. | SM000033981 |
| Status | Available |
Key features
- Adopts brand new design to reduce power consumption.
- Supports multiple ISP functions like CCM to provide high-quality images.
- Compact design with mounting holes on panels for flexible mounting from 4 sides.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
The 3072 × 2048 resolution and 2.4 μm pixels give enough detail for surface defect detection on medium-sized parts, component presence and orientation checks on printed circuit boards, and reading small characters (OCR) on labels. Monochrome output improves light efficiency in contrast-based measurement and edge detection, and 19.1 fps suits assembly and packaging lines running at moderate pace. The wide exposure range and 71.5 dB dynamic range are an advantage on reflective metal surfaces and in stations with mixed lighting.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data