HIKROBOT MV-CS050-90GM — Area Scan Cameras
5 MP, GMAX3405, GigE, Mono, 24.2 fps
The MV-CS050-90GM is the 5 MP monochrome model in the CS series GigE family that uses the GMAX3405 sensor; in 2/3-inch format with a 3.4 μm pixel pitch and global shutter it delivers 24.2 fps at 2448 × 2048 in Mono 8. Its distinguishing trait is exposure flexibility: besides the standard 5 μs–10 s range there is an UltraShort exposure mode operating between 2 μs and 4 μs, and gain can be opened up to 0–24 dB. With 39.4 dB SNR and 66 dB dynamic range, this version, listed as 2nd Basic in the product name, adds a different sensor alternative to the family’s 5 MP GigE options.
The Gigabit Ethernet interface (1000 Mbit/s, Fast Ethernet compatible) offers 100 m of transmission without a relay and can be powered over a single cable thanks to PoE; typical consumption is 2.2 W at 12 VDC, and external 9–24 VDC supply goes through the P7 connector. The same 6-pin connector holds the opto-isolated input (Line 0), opto-isolated output (Line 1) and bi-directional Line 2, and gain, exposure, contrast and Gamma can be set automatically or manually. The 29 × 29 × 42 mm, roughly 100 g body comes with mounting holes on four sides, and GigE Vision V2.0 plus GenICam compliance guarantees standard software support.
Specifications
| CS Series — Small & Medium Resolution | |
|---|---|
| Model | MV-CS050-90GM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | GMAX3405 |
| Pixel size | 3.4 μm × 3.4 μm |
| Sensor size | 2/3″ |
| Resolution | 2448 × 2048 |
| Max. frame rate | 24.2 fps @ 2448 × 2048 Mono 8 |
| Dynamic range | 66 dB |
| SNR | 39.4 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | UltraShort exposure mode: 2 μs to 4 μs Standard exposure mode: 5 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 2.2 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000079779 |
| Status | Available |
Key features
- Adopts brand new design to reduce power consumption.
- Supports auto or manual adjustment for gain, exposure control, white balance, contrast ratio, Gamma correction, etc.
- Compact design with mounting holes on panels for flexible mounting from 4 sides.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
UltraShort exposure of a few microseconds is meant for situations where a normal frame rate is enough but every frame must be extremely sharp: capturing high-speed rotating shafts, spray or droplet formation, and the instantaneous position of pneumatic mechanisms without blur. At 24.2 fps and 5 MP those sharp frames combine with dimensional measurement and defect detection. With PoE and 100 m of cable reach, the camera can be placed inside a test rig or machine enclosure independently of the computer.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data