HIKROBOT MV-CS050-60UM V5 — Area Scan Cameras
5 MP, Stacked BSI, USB 3.0, Mono, 60 fps
What sets the MV-CS050-60UM V5 apart is that it runs the same Stacked BSI global shutter sensor in two selectable characters: a high full well capacity mode with 0–12.8 dB gain and 30 μs–10 s exposure, and a high sensitivity mode with 0–24 dB gain and exposure from 5 μs to 10 s. One camera can therefore resist saturation in brightly lit scenes or pull detail out of dim ones. Everything else matches the 5 MP class of the CS series: a 2/3-inch sensor, 3.45 μm pixels, 60 fps at 2448 × 2048 in Mono 8, 42.4 dB SNR and 73.9 dB dynamic range.
The USB 3.0 interface (USB 2.0 compatible) carries data and power on a single cable; typical consumption is 1.5 W at 5 VDC, lower than its 60 fps sibling in the family, and 9–24 VDC can be supplied through the P7 connector when needed. Triggering covers hardware and software modes with Sequencer support, and the three lines on P7 (opto-isolated input, opto-isolated output, bi-directional Line 2) are enough to synchronise a light source and a PLC. The 29 × 29 × 30 mm, roughly 80 g housing operates from –30 °C to 60 °C and can be stored up to 80 °C, and it follows the USB3 Vision and GenICam standards.
Specifications
| CS Series — Small & Medium Resolution | |
|---|---|
| Model | MV-CS050-60UM V5 |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Stacked BSI |
| Pixel size | 3.45 μm × 3.45 μm |
| Resolution | 2448 × 2048 |
| Sensor size | 2/3″ |
| Max. frame rate | 60 fps @ 2448 × 2048 Mono 8 60 fps @ 2448 × 2048 Bayer GR 8 |
| SNR | 42.4 dB |
| Dynamic range | 73.9 dB |
| Gain | High full well capacity: 0 dB to 12.8 dB High sensitivity: 0 dB to 24 dB |
| Exposure time | High full well capacity: 30 μs to 10 sec High sensitivity: 5 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | USB 3.0, compatible with USB 2.0 |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports USB 3.0 power supply |
| Power consumption | Typ. 1.5 W @ 5 VDC (USB 3.0 provides power supply) |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 80 g (0.2 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with USB3 Vision Protocol |
| Operating system | 32/64-bit Windows 7/10/11, and 32/64-bit Linux |
| Compatibility | USB3 Vision, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000090985 |
| Status | Available |
Key features
- Adopts brand new structure design and supports installation from four sides.
- Supports Super Palette and Super Bayer to provide high-quality images.
- Supports auto or manual adjustment of gain, exposure time, white balance, LUT, Gamma correction, etc., and supports Sequencer.
- Supports hardware trigger, software trigger, anyway mode, etc.
- Compatible with USB3 Vision Protocol, GenICam Standard, and the third-party software based on the protocol and standard.
Where it is used
The dual gain modes let a single camera switch between two profiles in plants where the same line runs under different lighting from shift to shift. High full well capacity mode gives glare-tolerant images when checking laser-marked shiny surfaces or glass and transparent packaging, while high sensitivity mode suits microsecond exposures under strobed lighting. At 5 MP and 60 fps, PCB assembly verification, pharmaceutical blister inspection and robot guidance are the leading scenarios.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data