HIKROBOT MV-CS050-60GM V5 — Area Scan Cameras
5 MP, Stacked BSI, GigE, Mono, 24.4 fps
The V5 edition of the Stacked BSI monochrome camera, the MV-CS050-60GM V5, raises full-resolution speed to 24.4 fps at 2448 × 2048 Mono 8 while keeping the sensor’s 42.4 dB SNR and 73.9 dB dynamic range. Its exposure and gain ranges are mode-dependent: high full well capacity with 45 μs to 10 s exposure and 0–12.8 dB gain, or high sensitivity with 5 μs to 10 s and 0–24 dB. Typical power consumption drops to 1.4 W at 12 VDC, the lowest among the 5 MP GigE cameras in this group.
Deployment uses standard Gigabit Ethernet with 100 m reach and Fast Ethernet fallback; PoE supplies power over the same cable, or a 9–24 VDC source connects via the 6-pin P7 connector. That connector also provides trigger and output lines: opto-isolated input Line 0, opto-isolated output Line 1 and a non-isolated bi-directional Line 2. Automatic or manual control of gain, exposure time, white balance, LUT and Gamma, together with Sequencer and ISP functions (CCM, Super Palette, Super Bayer), is exposed through the GigE Vision V2.0 and GenICam interfaces; the housing measures 29 × 29 × 42 mm and weighs roughly 100 g.
Specifications
| CS Series — Small & Medium Resolution | |
|---|---|
| Model | MV-CS050-60GM V5 |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Stacked BSI |
| Pixel size | 3.45 μm × 3.45 μm |
| Sensor size | 2/3″ |
| Resolution | 2448 × 2048 |
| Max. frame rate | 24.4 fps @ 2448 × 2048 Mono 8 |
| Dynamic range | 73.9 dB |
| SNR | 42.4 dB |
| Gain | High full well capacity: 0 dB to 12.8 dB High sensitivity: 0 dB to 24 dB |
| Exposure time | High full well capacity: 45 μs to 10 sec High sensitivity: 5 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 1.4 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000086875 |
| Status | Available |
Key features
- Adopts brand new design to reduce power consumption.
- Supports auto or manual adjustment of gain, exposure time, white balance, LUT, Gamma correction, etc., and supports Sequencer function.
- Supports ISP functions like CCM, Super Palette, and Super Bayer to provide high-quality images.
- Compact design with mounting holes on panels for flexible mounting from 4 sides.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
Low power and high dynamic range together suit this model to multi-camera installations powered from PoE switches — for example several measurement or inspection stations along an assembly line — where heat and cabling budgets are tight. The high-sensitivity mode with a 5 μs exposure floor helps capture short flashes or fast-moving parts, while the high full well mode serves high-contrast scenes such as reflective metal or glass.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data