HIKROBOT MV-CS050-20GM — Area Scan Cameras
5 MP, OnSemi XGS5000, GigE, Mono, 22.7 fps
The MV-CS050-20GM is the Basic-tier 5 MP GigE monochrome camera of the CS series, using the OnSemi XGS5000 global-shutter CMOS with 3.2 μm pixels in a 2/3″ format. Its 2592 × 2048 resolution gives a slightly wider frame than other 5 MP models in the family, at 22.7 fps with 39.6 dB SNR and 66 dB dynamic range. Gain spans 0 to 18 dB, and a contrast ratio function is provided to fine-tune image clarity.
The Gigabit Ethernet interface (Fast Ethernet compatible) allows cable runs of up to 100 meters without relay, and PoE support means a single network cable can carry both data and power; otherwise 9–24 VDC is supplied through the 6-pin P7 connector with a typical 2.5 W draw at 12 VDC. The P7 connector also provides the opto-isolated input (Line 0), opto-isolated output (Line 1) and non-isolated bi-directional Line 2. The 29 × 29 × 42 mm C-mount housing weighs about 100 g, offers mounting holes on four sides, and conforms to GigE Vision V2.0 and GenICam.
Specifications
| CS Series — Small & Medium Resolution | |
|---|---|
| Model | MV-CS050-20GM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | OnSemi XGS5000 |
| Pixel size | 3.2 μm × 3.2 μm |
| Sensor size | 2/3″ |
| Resolution | 2592 × 2048 |
| Max. frame rate | 22.7 fps @ 2592 × 2048 |
| Dynamic range | 66 dB |
| SNR | 39.6 dB |
| Gain | 0 dB to 18 dB |
| Exposure time | UltraShort exposure mode: 23 μs to 99 μs Standard exposure mode: 100 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 2.5 W@12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 100 g (0.22 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000036826 |
| Status | Available |
Key features
- Adopts brand new design to reduce power consumption.
- Supports contrast ratio function to adjust image clarity.
- Supports auto or manual adjustment for gain, exposure control, LUT, Gamma correction, etc.
- Compact design with mounting holes on panels for flexible mounting from 4 sides.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
With 2592 × 2048 mono resolution and a modest 22.7 fps, this camera targets applications where field of view and detail matter more than speed: dimensional measurement of parts, inspection of surface defects and completeness checks on assemblies. The 100 m GigE reach and PoE make it suitable for cameras distributed along a long line or mounted far from the control cabinet.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data