HIKROBOT MV-CS016-11GM — Area Scan Cameras
1.6 MP, Sony IMX273, GigE, Mono, 78.2 fps
As the 1.6 MP monochrome option on the GigE side of the CS series, the MV-CS016-11GM combines the Sony® IMX273 with a second-generation design. Its 74 dB dynamic range is wider than that of its siblings MV-CS016-10GM (65.4 dB) and MV-CS016-10UM (71.1 dB), complemented by 41 dB SNR and 0–24 dB gain. The 1/2.9-inch global shutter CMOS with 3.45 μm × 3.45 μm pixels reaches 78.2 fps at 1440 × 1080; exposure runs 1–14 μs in UltraShort mode and 15 μs to 10 s in standard mode.
The Gigabit Ethernet link (1000 Mbit/s) works over a single cable up to 100 m and is compatible with Fast Ethernet (100 Mbit/s) networks; with PoE, power comes down the same cable, or the camera can be fed 9–24 VDC, drawing typically 2.3 W at 12 VDC. The 6-pin P7 connector hosts the opto-isolated input (Line 0), opto-isolated output (Line 1) and bi-directional non-isolated Line 2. Gain, exposure, LUT, gamma and white balance are adjustable automatically or manually; the 29 × 29 × 42 mm, roughly 100 g body mounts from four sides and links to third-party software through GigE Vision V2.0 / GenICam.
Specifications
| CS Series — Small & Medium Resolution | |
|---|---|
| Model | MV-CS016-11GM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX273 |
| Pixel size | 3.45 μm × 3.45 μm |
| Sensor size | 1/2.9″ |
| Resolution | 1440 × 1080 |
| Max. frame rate | 78.2 fps @ 1440 × 1080 Mono 8 |
| Dynamic range | 74 dB |
| SNR | 41 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | UltraShort exposure mode: 1 μs to 14 μs Standard exposure mode: 15 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2 |
| Decimation | Supports 1 × 1, 2 × 2 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 2.3 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 100 g (0.22 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | M000157814 |
| Status | Available |
Key features
- Adopts brand new design to reduce power consumption.
- Supports auto or manual adjustment for gain, exposure time, LUT, Gamma correction, white balance, etc.
- Adopts GigE interface and max. transmission distance of 100 meters without delay.
- Compact design with mounting holes on panels for flexible mounting from 4 sides.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
The wide dynamic range limits detail loss in scenes where very bright and dark regions share one frame, such as weld seams and laser marking; the monochrome sensor delivers direct greyscale data for OCR, code reading and dimensional measurement. At 78.2 fps it covers medium-speed assembly and packaging lines in long-distance, PoE-fed installations. Exposure down to 1 μs captures parts in motion without blur on rotary tables and fast feeders.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data