HIKROBOT MV-CS016-10UC V5 — Area Scan Cameras
1.6 MP, Sony IMX273, USB3.0, Color, 249.1 fps
Power and 249.1 color frames per second over a single USB3.0 cable: that is the MV-CS016-10UC V5 in one line. This V5 release of the 1.6 MP color USB3.0 camera in the CS series is listed with a typical draw of 1.7 W at 5 VDC and an external supply range of 9–24 VDC. Its Sony® IMX273 global shutter CMOS (1/2.9-inch, 3.45 μm × 3.45 μm, 1440 × 1080) operates at 39.8 dB SNR, 70.8 dB dynamic range and 0–17 dB gain, with exposure from 1–14 μs in UltraShort mode and 15 μs to 10 s in standard mode.
Color output can be selected as Bayer RG 8/10/10Packed/12/12Packed, YUV422Packed, YUV422_YUYV_Packed, RGB 8 or BGR 8, and Mono 8 is also available. The 6-pin P7 connector brings external power and the I/O lines together (opto-isolated input Line 0, opto-isolated output Line 1, bi-directional Line 2); triggering is hardware, software or free-run, and USB2.0 compatibility is retained. Sequencer, contrast ratio, white balance and gamma are processed in-camera; the 29 × 29 × 30 mm, roughly 80 g body mounts from four sides, stores from -30 °C to 80 °C and complies with USB3.0 Vision / GenICam.
Specifications
| CS Series — Small & Medium Resolution | |
|---|---|
| Model | MV-CS016-10UC V5 |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX273 |
| Pixel size | 3.45 μm × 3.45 μm |
| Sensor size | 1/2.9″ |
| Resolution | 1440 × 1080 |
| Max. frame rate | 249.1 fps @ 1440 × 1080 Bayer RG 8 |
| Dynamic range | 70.8 dB |
| SNR | 39.8 dB |
| Gain | 0 dB to 17 dB |
| Exposure time | UltraShort exposure mode: 1 μs to 14 μs Standard exposure mode: 15 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Color |
| Pixel format | Mono 8 Bayer RG 8/10/10Packed/12/12Packed YUV422Packed, YUV422_YUYV_Packed RGB 8, BGR 8 |
| Binning | Supports 1 × 1, 2 × 2 |
| Decimation | Supports 1 × 1, 2 × 2 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | USB3.0, compatible with USB2.0 |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports USB3.0 power supply |
| Power consumption | Typ. 1.7 W @ 5 VDC (USB3.0 provides power supply) |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 80 g (0.18 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with USB3.0 Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | USB3.0 Vision, GenlCam |
| Certification | CE, RoHS, KC |
| EMVA data（typical） | |
| Quantum efficiency | 55.68 % |
| Dark noise | 2.1 e- @ 12 bit |
| Saturation capacity | 9.5 ke- |
| HIKROBOT part no. | SM000104084 |
| Status | Available |
Key features
- Adopts brand new design to reduce power consumption.
- Supports sequencer, contrast ratio, white balance, Gamma correction, etc.
- Supports hardware trigger, software trigger, and free run.
- Compact design with mounting holes on panels for flexible mounting from 4 sides.
- Compatible with USB3.0 Vision Protocol, GenICam Standard, and the third-party software based on the protocol and standard.
Where it is used
The modest power requirement stands out in multi-angle inspection cells where several color cameras share one USB hub and in enclosed, heat-sensitive cabinets. Color at 249.1 fps suits cap and seal color checks on fast lines, colored-wire sequence verification and component color-code reading on printed circuit boards. With exposure down to 1 μs, color information is captured without smear even on bright, fast-moving surfaces.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data