Advantech FPM-700 Series — Industrial Panels
10.1″ – 23.8″ industrial touch monitor series — no compute of its own; connects to a box PC, PLC or SCADA server over HDMI/DP/VGA (USB-C on FPM-710SW). IP66 front, resistive or P-CAP touch, 24 VDC, panel/wall/VESA mounting.
Manufacturer: Advantech
Screen sizes: 10.1″ · 15″ · 15.6″ · 17″ · 19″ · 21.5″ · 23.8″
Video input: HDMI · DisplayPort · VGA (FPM-710SW: HDMI · DP · USB-C)
Touch: 5-wire resistive (715/717/719) · 10-point P-CAP (710SW/715W/721W/724W)
Number of models: 7 (current FPM-7xx models with HDMI/DP inputs)
FPM-700 is Advantech’s general-purpose industrial monitor series: it separates the display from the computer and takes the picture from an existing box PC, PLC/IPC or SCADA server over HDMI, DisplayPort or VGA. The processor stays in the cabinet while only a slim IP66-rated screen is flush-mounted in the panel; screen and computer can be replaced independently. The series comprises 4:3/5:4 resistive-touch models (15″, 17″, 19″), Full HD widescreen P-CAP models (15.6″, 21.5″, 23.8″) and the 10.1″ FPM-710SW that runs on a single USB-C cable.
Common platform: direct HDMI/DP/VGA, IP66, 24 VDC
All models take video directly over HDMI, DisplayPort and VGA (HDMI, DP and USB Type-C on FPM-710SW); touch data goes to the host over USB (plus RS-232 on resistive models). Power is 24 VDC via terminal block (710SW: 12 – 24 VDC) with lockable connectors. The front is IP66-rated; the rear cover is die-cast aluminium and, on resistive models, the front panel die-cast magnesium alloy. Operating range −20 to 60 °C (710SW −10 to 50 °C, 724W 0 to 50 °C), vibration 5 – 500 Hz 1 Grms; mounting by stand, wall, panel and VESA arm (75 × 75 mm; 710SW 100 × 100 mm), plus a rack kit on resistive models.
Resistive or P-CAP
FPM-715 / 717 / 719: 5-wire analog resistive screen, anti-glare tempered-glass surface (3H/4H), above 75 % light transmission — for glove and stylus use, replacement of previous-generation HMIs and 4:3/5:4 panel cutouts. FPM-715W / 721W / 724W and 710SW: 10-point projected-capacitive touch behind true-flat 7H glass, 16:9/16:10 widescreen — for modern HMI/SCADA interfaces, multi-touch and an easy-to-clean flat surface. Brightness 300 – 450 cd/m², backlight life 30,000 – 70,000 hours.
FPM-710SW: the single-cable monitor
The newest member, the 10.1″ WUXGA (1920 × 1200) FPM-710SW, is Advantech’s first single-cable industrial touch monitor: the USB Type-C connection carries video, touch data and power over one cable. Advantech’s datasheet lists UNO-238 (C3N1AE/C5N1AE/C7N1AE) and UNO-2271G-I331AE as compatible hosts; classic HDMI/DP + USB + 12 – 24 VDC wiring is also possible.
Where it is used
Operator display flush-mounted in a cabinet door for the box PC or IPC inside; line-monitoring and alarm board connected to a PLC/SCADA server; on-machine visualisation; IP66-surface touch interface on clean-room and food lines; screen-plus-separate-computer architecture instead of a panel PC. FST commissions the monitor together with a box PC / compact modular PC and SCADA/HMI software as one solution.
Models in the series
The seven current FPM-700 models with HDMI/DP inputs are listed below; click a model name in the cards or the table for specifications, ordering and accessories. Contact us for Advantech’s FPM-200 (value line), previous-generation FPM-7xxxT/W (VGA/DVI/DP inputs) and FPM-1150G models in the same category.
FPM-710SW
10.1″ · WUXGA 1920 × 1200 · 10-point P-CAP · single-cable USB-C + HDMI/DP · New
FPM-715
15″ · XGA 1024 × 768 · resistive · HDMI/DP/VGA
FPM-717
17″ · SXGA 1280 × 1024 · resistive · HDMI/DP/VGA
FPM-719
19″ · SXGA 1280 × 1024 · resistive · HDMI/DP/VGA
FPM-715W
15.6″ · Full HD 1920 × 1080 · 10-point P-CAP · HDMI/DP/VGA
FPM-721W
21.5″ · Full HD 1920 × 1080 · 10-point P-CAP · HDMI/DP/VGA
FPM-724W
23.8″ · Full HD 1920 × 1080 · 10-point P-CAP · HDMI/DP/VGA
| Model | Screen | Resolution | Brightness | Touch | Video input | Dimensions | Power (max.) |
|---|---|---|---|---|---|---|---|
| FPM-710SW | 10,1″ | 1920 × 1200 | 380 cd/m² | 10-point P-CAP | HDMI · DP · USB-C | 260.5 × 179.1 × 45.0 mm | 12 V: 1.04 W / 10.16 W · 24 V: 0.82 W / 10.66 W |
| FPM-715 | 15″ | 1024 × 768 | 300 cd/m² | Resistive | HDMI · DP · VGA | 383.2 × 307.3 × 50 mm | 1.03 W / 9.88 W |
| FPM-717 | 17″ | 1280 × 1024 | 350 cd/m² | Resistive | HDMI · DP · VGA | 410.4 × 343.4 × 51 mm | 1.05 W / 14.55 W |
| FPM-719 | 19″ | 1280 × 1024 | 350 cd/m² | Resistive | HDMI · DP · VGA | 454 × 379.8 × 48.5 mm | 1.04 W / 15.44 W |
| FPM-715W | 15,6″ | 1920 × 1080 | 450 cd/m² | 10-point P-CAP | HDMI · DP · VGA | 419.7 × 269 × 52 mm | 0.89 W / 12.71 W |
| FPM-721W | 21,5″ | 1920 × 1080 | 350 cd/m² | 10-point P-CAP | HDMI · DP · VGA | 558.4 × 349.8 × 53.2 mm | 0.155 W / 34.21 W |
| FPM-724W | 23,8″ | 1920 × 1080 | 350 cd/m² | 10-point P-CAP | HDMI · DP · VGA | 595.9 × 374.1 × 53 mm | 0.158 W / 25.47 W |
Is FPM-700 right for your project?
Share the screen size, touch type (glove use → resistive, multi-touch → P-CAP), your panel cutout and the video output of the computer to be connected; let’s choose the model, mounting kit and, if needed, the box PC together.
All product specifications are subject to change without notice; data compiled from Advantech’s FPM-710SW, FPM-715/717/719 and FPM-715W/721W/724W datasheets dated 8 September 2026 and the advantech.com product pages.
Source: Advantech product data