HIKROBOT MV-CT2MG0032/G/16LC/WN — Area Scan Cameras

The HIKROBOT MV-CT2MG0032/G/16LC/WN is the GigE MAX model of the third-generation CT series area scan camera family. Its 1/1.8″ global shutter stacked BSI CMOS sensor, with a 3.45 µm pixel size, produces 2048 × 1536 resolution (3.2 MP) mono images, reaching 39 fps in standard mode and up to 77.5 fps with lossless compression enabled. A 73.9 dB dynamic range and 42.4 dB signal-to-noise ratio deliver high image quality. Gain ranges from 0-12.8 dB in high full-well mode to 0-24 dB in high sensitivity mode, with exposure time correspondingly ranging from 30 µs-10 s to 5 µs-10 s. This dual-mode design provides flexibility for scenarios that require either wide dynamic range or low-light sensitivity.

Data is transferred over a 1000 Mbit/s Gigabit Ethernet interface, compatible with 100 Mbit/s Fast Ethernet, via an 8-pin M12 X-Code waterproof connector; a separate 8-pin M12 A-Code waterproof connector carries control signals. Powered from 9-24 VDC and PoE-capable, it typically draws 1.6 W at 24 VDC. The 42 × 42 × 43 mm body, weighing approximately 113 g, reaches IP67 protection when the lens, housing and cables are correctly installed, and can operate between -30 °C and 60 °C. Support for GigE Vision V2.0 and GenICam simplifies integration with various machine vision software. This SKU comes with a 16 mm liquid lens and white base light source integrated at the C-Mount interface, an integrated optic/light package that delivers a ready-to-use imaging solution with simplified setup.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• 100 metre cable reach. The Gigabit Ethernet interface transmits up to 100 metres without a relay; PoE allows power over a single cable.
• Open standard compliance. Works seamlessly with the GigE Vision V2.0 protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a fully waterproof M12 X-Code connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology. (This model is mono; the feature applies to its colour counterpart.)

Where it is used

A frame rate of 39-77.5 fps combined with 3.2 MP resolution suits medium-to-high-speed in-line inspection and measurement applications. The ability to switch between high full-well and high sensitivity modes provides flexibility under varying lighting conditions. The integrated lens and light source simplify setting up compact imaging stations without separate optics/lighting selection. IP67 protection and waterproof connectors support reliable operation in demanding environments.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.