HIKROBOT MV-CT1CG0016/G/NN/NN — Area Scan Cameras

The HIKROBOT MV-CT1CG0016/G/NN/NN is the GigE-interface PRO model in the third-generation CT series area scan camera family. Its 1/2.9″ optical format global shutter stacked BSI CMOS sensor, with a 3.45 µm × 3.45 µm pixel size, produces color images at 1440 × 1080 resolution and reaches up to 180 fps (in Bayer GB 8 format) when lossless compression is enabled. A 68.3 dB dynamic range and 44 dB signal-to-noise ratio preserve detail under varying lighting conditions. Gain is adjustable from 0 dB to 24 dB, and exposure time ranges from 23 µs to 10 seconds. The global shutter architecture captures moving objects without distortion, while the high frame rate keeps fast-moving targets sharp. The compact 29 × 29 × 42 mm housing and approximately 124 g weight also suit the camera to tight mounting spaces.

The camera communicates over a 1000 Mbit/s Gigabit Ethernet data interface and is compatible with 100 Mbit/s Fast Ethernet; connection is made through an 8-pin M12 X-Code waterproof connector. There is no separate control connector — triggering and I/O are handled over the data interface. Power can be supplied in the 9–24 VDC range with PoE support; typical power consumption is 1.6 W at 12 VDC. The IP67 rating provides dust and water resistance when the lens, housing, and cables are correctly installed, and allows operation between -30 °C and 60 °C. The PRO version combines the waterproof M12 X-Code connector with precise temperature control. The camera complies with GigE Vision V2.0 and GenICam standards.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• 100 metre cable reach. The Gigabit Ethernet interface transmits up to 100 metres without a relay; PoE allows power over a single cable.
• Open standard compliance. Works seamlessly with the GigE Vision V2.0 protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a fully waterproof M12 X-Code connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology.

Where it is used

A frame rate of up to 180 fps at 1440 × 1080 resolution with lossless compression enabled suits this model to high-speed counting, positioning, and in-line inspection tasks. The combination of mid-level resolution and high frame rate allows detail to be captured without loss on fast-moving objects. The IP67 rating and -30 °C to 60 °C operating range provide durability in dusty or humidity-variable environments. The GigE interface, with PoE support, enables both data and power transmission over a single cable.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.