HIKROBOT MV-CT0MU0060/R/NN/NN — Area Scan Cameras

The HIKROBOT MV-CT0MU0060/R/NN/NN is the USB 3.0-interface BASE model in the third-generation CT series area scan camera family. Its 1/1.8″ optical format rolling-shutter Sony IMX178 CMOS sensor, with 2.4 µm × 2.4 µm pixels, delivers 3072 × 2048 (6.0 MP) mono images at up to 60.9 fps in Mono 8 mode. A 66.2 dB dynamic range and 41.4 dB signal-to-noise ratio provide balanced image quality under moderate lighting. Gain is adjustable from 0 dB to 24 dB, and exposure time from 8 µs to 1 s. The combination of the rolling-shutter architecture, 6.0 MP resolution, and a 60.9 fps frame rate makes this camera suited to mid-to-high-speed imaging tasks.

The MV-CT0MU0060/R/NN/NN transmits data over USB 3.0, with USB 2.0 compatibility, through a Type-C connector. The camera has no separate control connector; I/O functions are handled over the data interface itself. Power input is 9-24 VDC, USB-powered, with typical consumption of 1.5 W at 5 VDC (USB 3.0 powered). The 29 mm × 29 mm × 30 mm housing weighs approximately 72 g and reaches IP40 protection when the lens and cables are correctly installed. It operates across a -30 °C to 60 °C ambient range and complies with USB3 Vision and GenICam; the lens mount is C-Mount.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• High-bandwidth Type-C. The Type-C interface supports higher transmission bandwidth.
• Open standard compliance. Works seamlessly with the USB3 Vision protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a waterproof connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology. (This model is mono; the feature applies to its colour counterpart.)

Where it is used

A frame rate of up to 60.9 fps and exposure times as short as 8 µs make this camera suited to mid-to-high-speed counting, positioning, and in-line visual inspection tasks. Its 6.0 MP resolution suits measurement and inspection work that needs detail over a wide area. The rolling-shutter design supports high-resolution imaging of static or moderately moving objects.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.