HIKROBOT MV-CT0MU0050/G/NN/NN — Area Scan Cameras

The HIKROBOT MV-CT0MU0050/G/NN/NN is the USB 3.0-interface BASE model in the third-generation CT series area scan camera family. Its 2/3″ optical format global-shutter stacked BSI CMOS sensor, with 3.45 µm × 3.45 µm pixels, delivers 2448 × 2048 (5.0 MP) mono images at up to 80 fps in Mono 8 mode. A 74.4 dB dynamic range and 42.4 dB signal-to-noise ratio preserve detail across a wide range of lighting conditions. The camera offers two operating modes: in high full-well mode, gain runs 0-12.8 dB with exposure from 30 µs to 10 s; in high sensitivity mode, gain runs 0-24 dB with exposure from 5 µs to 10 s. This structure gives flexibility to prioritize either low-light sensitivity or dynamic range in bright scenes.

The MV-CT0MU0050/G/NN/NN transmits data over USB 3.0, with USB 2.0 compatibility, through a Type-C connector. The camera has no separate control connector; I/O functions are handled over the data interface itself. Power input is 9-24 VDC, USB-powered, with typical consumption of 1.6 W at 5 VDC (USB 3.0 powered). The 29 mm × 29 mm × 30 mm housing weighs approximately 72 g and reaches IP40 protection when the lens and cables are correctly installed. It operates across a -30 °C to 60 °C ambient range and complies with USB3 Vision and GenICam; the lens mount is C-Mount.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• High-bandwidth Type-C. The Type-C interface supports higher transmission bandwidth.
• Open standard compliance. Works seamlessly with the USB3 Vision protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a waterproof connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology. (This model is mono; the feature applies to its colour counterpart.)

Where it is used

A frame rate of up to 80 fps combined with 5.0 MP resolution makes this a balanced option for mid-to-high-speed in-line quality control and measurement tasks. The two gain/exposure modes provide flexibility under variable lighting. The 74.4 dB dynamic range reduces detail loss in tasks such as defect detection on high-contrast surfaces.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.