HIKROBOT MV-CT0MG0200/R/NN/NN — Area Scan Cameras

The HIKROBOT MV-CT0MG0200/R/NN/NN is the GigE-interface BASE model in the third-generation CT series area scan camera family. Its 1″ optical format rolling-shutter Sony IMX178 CMOS sensor, with 2.4 µm × 2.4 µm pixels, delivers 5472 × 3648 (20.0 MP) mono images at up to 5.9 fps in Mono 8 mode. A 65.9 dB dynamic range and 41.3 dB signal-to-noise ratio preserve fine detail in high-resolution captures. Gain is adjustable from 0 dB to 24 dB, and exposure time from 46 µs to 2.78 s, giving the camera flexibility across low- and high-light conditions. The rolling-shutter architecture combined with the 20.0 MP resolution indicates a design oriented toward capturing fine detail on static or slow-moving targets rather than high-speed motion.

The MV-CT0MG0200/R/NN/NN transmits data over Gigabit Ethernet (1000 Mbit/s), with Fast Ethernet (100 Mbit/s) compatibility, through an RJ45 connector. The camera has no separate control connector; I/O functions are handled over the data interface itself. Power input is 9-24 VDC with PoE support, and typical consumption is 1.6 W at 12 VDC. The 29 mm × 29 mm × 42 mm housing weighs approximately 116 g and reaches IP40 protection when the lens and cables are correctly installed. It operates across a -30 °C to 60 °C ambient range and complies with GigE Vision V2.0 and GenICam; the lens mount is C-Mount.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• 100 metre cable reach. The Gigabit Ethernet interface transmits up to 100 metres without a relay; PoE allows power over a single cable.
• Open standard compliance. Works seamlessly with the GigE Vision V2.0 protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a fully waterproof M12 X-Code connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology. (This model is mono; the feature applies to its colour counterpart.)

Where it is used

The 5.9 fps frame rate paired with 20.0 MP resolution points to tasks that prioritize detail over speed: wide-area high-resolution measurement, defect inspection, and character or mark reading. The PoE-capable GigE interface simplifies single-cable, long-distance deployment for in-line inspection stations. The wide exposure range (46 µs to 2.78 s) suits imaging of static or slow-moving objects under variable lighting.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.