HIKROBOT MV-CT0MG0089/G/NN/NN — Area Scan Cameras

The HIKROBOT MV-CT0MG0089/G/NN/NN is the GigE-interface BASE model in the third-generation CT series of area scan cameras. Its 1″ global shutter stacked BSI CMOS sensor, with a 3.45 µm pixel size, delivers 4096 × 2160 (8.9 MP) mono images at up to 13.9 fps. A 67.2 dB dynamic range and 44.2 dB signal-to-noise ratio help preserve detail across the wide-resolution image. Gain is adjustable from 0 dB to 12 dB. Exposure time ranges from 10 µs to 19 µs in ultra-short exposure mode and from 20 µs to 10 s in standard exposure mode. This high-resolution global shutter sensor enables large surfaces or objects with a high level of detail to be captured in a single frame. The C-Mount lens interface allows flexibility across different optical configurations.

The camera communicates over a Gigabit Ethernet interface (1000 Mbit/s), backward compatible with 100 Mbit/s Fast Ethernet, connected via an RJ45 connector. There is no separate control connector; control functions are handled over the data interface itself. Powered at 9–24 VDC with PoE support, the camera draws a typical 1.7 W at 12 VDC. Its compact 29 × 29 × 42 mm body weighs approximately 116 g. With the lens and cables correctly installed, it reaches IP40 protection, and it operates across an ambient temperature range of −30 °C to 60 °C. Compliance with GigE Vision V2.0 and GenICam standards simplifies integration with third-party machine vision software.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• 100 metre cable reach. The Gigabit Ethernet interface transmits up to 100 metres without a relay; PoE allows power over a single cable.
• Open standard compliance. Works seamlessly with the GigE Vision V2.0 protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a fully waterproof M12 X-Code connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology. (This model is mono; the feature applies to its colour counterpart.)

Where it is used

The 8.9 MP resolution is an advantage for measurement and visual inspection tasks that require capturing extensive detail across a wide field of view in a single frame. An exposure time as short as 10 µs in ultra-short exposure mode allows fast-moving objects to be imaged without blur. A 13.9 fps frame rate provides sufficient throughput for medium-speed inline inspection applications. The GigE interface with PoE support delivers data and power over a single cable, simplifying multi-camera line setups.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.