HIKROBOT MV-SC2013XC-12M-WBN — Smart Cameras & Vision Sensors
1.3MP SC2000X Vision Sensor, Color, 12mm lens

Status: Available
Product family: SC2000 Series Vision Sensor
HIKROBOT part no.: SM000106209
Series: SC2000X
Request a quote and stock checkThe HIKROBOT MV-SC2013XC-12M-WBN is a 1.3-megapixel model within the SC2000X series of vision sensors (smart cameras). It produces color images at a resolution of 1280 × 1024 and reaches frame rates of up to 55 fps. Its 12 mm lens gives it a field of view suited to the application. Thanks to its compact, single-body design, it can operate independently on the production line without requiring a separate processor or external controller. Within the series, this model is built around a baseline resolution-to-speed balance for common verification and positioning tasks.
With a 12 mm lens giving a balanced field of view from a medium distance, this color model suits stations that need neither very close nor very long-range positioning. Embedded hardware and built-in algorithms let the camera make decisions independently, and rich I/O connections allow it to communicate directly with a PLC or other equipment, with multiple indicators giving instant status information on-site. Color imaging helps in applications where differences in packaging or label color must be distinguished, while integrated illumination and support for multiple communication protocols round out a stable, flexible setup.
Specifications
| SC2000E — Ultra-compact Vision Sensor | |
|---|---|
| Model | MV-SC2013XC-12M-WBN |
| Performance | |
| Sensor type | CMOS, global shutter |
| Pixel size | 2.7 μm × 2.7 μm |
| Sensor size | 1/4″ |
| Resolution | 1280 × 1024 |
| Max. frame rate | 55 fps |
| Gain | 0 dB to 29 dB (analog gain) |
| Exposure time | 35 μs to 100 ms |
| Pixel format | RGB 8, Mono 8 |
| Mono/color | Color |
| Electrical feature | |
| Data interface | Fast Ethernet (100 Mbit/s) |
| Digital I/O | 17-pin M12 connector provides power and I/O, including isolated input (Line 0/1) × 2, isolated output (Line 2/3) × 2, RS-232 × 1 Supports device triggering via pressing side button. |
| Power supply | 24 VDC |
| Power consumption | Avg.: 5 W @ 24 VDC (light source enabled) Max.: 12 W @ 24 VDC (light source enabled) |
| Mechanical | |
| Lens mount | M12-mount, mechanical autofocus supported |
| Focal length | 12 mm |
| Lens cap | Transparent lens cap by default. Half-polarized and fully-polarized caps are optional. |
| Light source | White light by default. Red, blue, IR, UV, and two-color (red/blue) lights are optional. |
| Aiming system | 2 green LED lights |
| Indicator | Power indicator (PWR), network indicator (LNK), result indicator (OK/NG), user-defined indicator (U1) |
| Dimension | Straight angle: 72.7 mm × 31.5 mm × 41 mm (2.9″ × 1.2″ × 1.6″) Right angle: 51.5 mm × 31.5 mm × 61 mm (2.0″ × 1.2″ × 2.4″) |
| Weight | 118 g (0.3 lb.) |
| Ingress protection | IP65 |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Vibration resistance | Meets standard IEC 60068-2-6:2007. Device only: 10 Hz to 55 Hz, 1.5 mm peak-to-peak amplitude, 2 hours per axis (X, Y, Z) |
| Shock resistance | Meets standard IEC 60068-2-27:2008. Device only: 30 g / 11 ms, half-sine wave, 500 shocks per axis (6 directions) |
| Tool | |
| Vision tool | Measurement: P2P measurement, P2L measurement, contrast measurement, grayscale size, edge width measurement, width measurement, brightness analysis, L2L angle, color measurement, color size, diameter measurement, line angle Existence: Existence detection, anomaly judge, spot existence, edge existence, contour existence, pattern existence, circle existence, line existence Count: Learning-based count, spot count, edge count, contour count, pattern count, color count Recognition: Multi-object count, category recognition, code recognition, OCR, color contrast, color recognition Logic: Calculator, if module, logic judge, condition judge, string comparison, combination judge, format output Defect detection: Anomaly detection Location: Calibration convert, single point alignment, point rectify, point grasp, scale transformation, fixture |
| Solution capacity | Supports solution importing and exporting, up to 16 solutions and 40 modules can be stored. |
| Communication protocol | RS-232, TCP, UDP, FTP, PROFINET, Modbus, EtherNet/IP, MELSEC/SLMP, FINS, Keyence KV |
| General | |
| Client software | SCMVS |
| Certification | CE, KC |
| Product identity | |
| Mono / colour | Colour |
| Product family | SC2000 Series Vision Sensor |
| Series | SC2000X |
| HIKROBOT part no. | SM000106209 |
| Material code | 308601482 |
| Status | Available |
Detailed electrical and mechanical specifications for this model require confirmation with HIKROBOT; please contact us.
Key features
- Embedded hardware platform. Adopts an embedded hardware platform for high-speed image processing.
- Built-in positioning and measurement algorithms. Built-in algorithms for counting, presence/absence detection, measurement and recognition.
- Rich I/O interfaces. Provides multiple I/O interfaces for input and output signals.
- Multiple status indicators. Multiple indicator lights for displaying device status.
- Integrated illumination. Adopts a light source to ensure uniform brightness across the illuminated area.
- Multi-protocol communication. Supports multiple communication protocols, including RS-232, TCP, UDP, FTP, PROFINET, Modbus, EtherNet/IP and other modes.
Where it is used
Suits general-purpose, medium-distance stations that need color-based discrimination, giving flexibility on lines that require neither very close nor very long-range positioning. Rich I/O makes PLC integration straightforward. A good fit for verification tasks that evaluate color differences on packaging or products from a medium distance.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this vision sensor right for your application?
Let us determine resolution, lens, vision-tool selection and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data
Other models in this series
- HIKROBOT MV-SC2004EC-08S-WBN
- HIKROBOT MV-SC2004EC-12S-WBN
- HIKROBOT MV-SC2004EC-15S-WBN
- HIKROBOT MV-SC2004EM-06S-WBN-Mini
- HIKROBOT MV-SC2004EM-08S-WBN
- HIKROBOT MV-SC2004EM-12S-WBN
- HIKROBOT MV-SC2004EM-15S-WBN
- HIKROBOT MV-SC2013XC-05M-WBN
- HIKROBOT MV-SC2013XC-16M-WBN
- HIKROBOT MV-SC2013XM-05M-WBN
- HIKROBOT MV-SC2013XM-12M-WBN
- HIKROBOT MV-SC2013XM-16M-WBN
