HIKROBOT MV-CL161-41CM — Line Scan Cameras
16384×1, Camera Link, Mono
The MV-CL161-41CM is a 16384×1 monochrome line scan camera that transmits data over the Camera Link protocol and is compatible with the GenICam standard. It includes multiple ISP technologies with manual adjustment of Gamma correction, FFC correction, LUT and black level. Note that this model is marked by the manufacturer as being in delisting preparation, so current stock and supply availability should be confirmed on a project basis.
Specifications
| CL Series — Line Scan | |
|---|---|
| Model | MV-CL161-41CM |
| Performance | |
| Sensor type | CMOS |
| Pixel size | 3.5 μm |
| Resolution | 16384 × 1 |
| Image mode | 1-line |
| Max. line rate | 10 kHz (Base), 20 kHz (Medium), 40 kHz (Full), and 50 kHz (80-bit) |
| Configuration mode | Base, Medium, Full, 80-bit |
| Tap geometry | 1 × 2, 1 × 4, 1 × 8, 1 × 10 |
| Tap number | 2 Taps, 4 Taps, 8 Taps, 10 Taps |
| Pixel clock | 40 MHz, 66 MHz, 80 MHz, 85 MHz |
| Dynamic range | 64.7 dB |
| SNR | 44.3 dB |
| Gain | Supports 1 ×, 2 ×, 4 ×, 8 × |
| Exposure time | 2 μs to 10 ms |
| Exposure mode | Off/ Once/ Continuous exposure mode; supports fixed exposure time, trigger-width exposure |
| Mono | Mono |
| Pixel format | Mono 8/10/12 |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal reverse image output |
| Trigger mode | External trigger, internal trigger |
| External trigger mode | Line trigger, frame trigger, line + frame trigger |
| Electrical feature | |
| Data interface | Camera Link (SDR connector); USB interface for updating firmware |
| Digital I/O | 12-pin P10 connector provides power and I/O: configurable input and output × 4 (Line 0/1/3/4), and support single-end/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4). |
| Power supply | 12 VDC to 24 VDC |
| Power consumption | Typ. 7.2 W @ 12 VDC |
| Mechanical | |
| Lens mount | M72*0.75, flange back length 12 mm, applicable to F-mount via lens adapter |
| Dimension | 76 mm × 76 mm × 42.1 mm (3.0″ × 3.0″ × 1.7″) |
| Weight | Approx. 320 g (0.7 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 55 °C (32 °F to 131 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 5% RH to 90% RH (no condensation) |
| General | |
| Client software | MVS and frame grabber software meeting with Camera Link Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11 |
| Compatibility | Camera Link V1.2, GenICam |
| Certification | CE, RoHS, KC |
| Product identity | |
| HIKROBOT part no. | SM000039700 |
| Status | Being discontinued |
Key features
- Integrates multiple ISP technologies, and supports manual adjustment of Gamma correction, FFC correction, LUT, black level, etc.
- Supports multiple exposure and acquisition modes.
- Adopts configurable bi-directional I/O hardware design.
- Compact design and flexible installation.
- Compatible with Camera Link Protocol and GenICam Standard.
Where it is used
The 16384×1 single-line resolution and Camera Link interface make this camera relevant for wide-web inspection applications that already rely on existing Camera Link infrastructure, such as wide roll/sheet inspection or glass and metal strip surface checks. For new installations, current supply availability should be confirmed first.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data