HIKROBOT MV-CL084-91F2M(2.0) — Line Scan Cameras
8192×4, XoFLink, Mono, TDI
The MV-CL084-91F2M(2.0) is an 8192×4 monochrome line scan camera that supports TDI (time delay integration) operation for improved sensitivity. It provides high-speed data transfer over dual XoF fiber ports and supports multi-light control with multiple exposure modes. A bi-directional configurable I/O hardware design simplifies integration into varied automation lines.
Specifications
| CL Series — Line Scan | |
|---|---|
| Model | MV-CL084-91F2M(2.0) |
| Performance | |
| Sensor type | CMOS |
| Pixel size | 7 μm × 7 μm |
| Resolution | 8192 × 4 |
| Image mode | Supports multi-light control: 1/2/3/4 light(s) Supports 1-Line, 2-TDI, 4-TDI |
| Max. line rate | 1-light mode: 200 kHz (1-Line), 100 kHz (2-TDI), 50 kHz (4-TDI) 2-light mode: 52 kHz (1-Line), 26 kHz (2-TDI) 3-light mode: 34.6 kHz (1-Line) 4-light mode: 26 kHz (1-Line) |
| Dynamic range | 63.4 dB |
| SNR | 40.8 dB |
| Gain | 1.0 × |
| Exposure time | 3 μs to 10 ms |
| Exposure mode | Off/Once/Continuous exposure mode, and supports trigger-width exposure |
| Mono/color | Mono |
| Pixel format | Mono 8/10/12 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal reverse image output |
| Trigger mode | External trigger, internal trigger |
| External trigger mode | Line trigger, frame trigger, line + frame trigger |
| Electrical feature | |
| Data interface | 2LC fiber connector |
| Digital I/O | 12-pin P10 connector provides power and I/O: Configurable input/output × 4 (Line 0/1/3/4) and single-ended/differential is supported. |
| Power supply | 12 VDC to 24 VDC |
| Power consumption | Typ. 15.4 W @ 24 VDC |
| Mechanical | |
| Lens mount | M72*0.75, flange back length 12 mm, applicable to F-mount via lens adapter |
| Dimension | 132 mm × 76 mm × 57.4 mm (5.2″ × 3.0″ × 2.3″) |
| Weight | Approx. 600 g (1.3 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –20 °C to 50 °C (–4 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 5% RH to 90% RH (no condensation) |
| General | |
| Client software | MVS |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11 |
| Compatibility | XoFLink, GenlCam |
| Certification | CE, RoHS, KC |
| Product identity | |
| HIKROBOT part no. | M000189259 |
| Status | Available |
Key features
- Supports multi-light control, multi-exposure, TDI, etc.
- Adopts multiple ISP like Gamma correction, flat field correction, LUT, black level offset, etc.
- Provides dual XoF fiber ports with high-speed.
- Adopts bi-directional configurable I/O hardware design.
- Compact design and flexible installation.
Where it is used
TDI support combined with high-speed dual-fiber transfer makes this camera well suited to mono inspection tasks under low-light conditions or demanding line-rate requirements, such as glass and metal surface inspection, solar panel/wafer inspection, and thin-film or foil line monitoring. Its multi-light control adapts to varied illumination scenarios.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data