HIKROBOT MV-CB020-60UM-C — Area Scan Cameras
2 MP, Stacked BSI CMOS, USB3.0, Mono, C-mount, 179.9 fps
The MV-CB020-60UM-C is a mono, C-mount camera in the USB3.0 board-level branch of the CB Series. Its Stacked BSI CMOS global-shutter sensor delivers 1624×1240 resolution at up to 179.9 fps, with 3.45 μm pixels, a 1/2.53″ optical format, 44.1 dB SNR and 68.6 dB dynamic range. Unlike its color siblings on this sheet, it outputs only Mono 8/10/10Packed/12/12Packed pixel formats; the built-in C-mount lets standard industrial lenses be screwed straight onto the board, which weighs approximately 30 g.
USB 3.0 (USB 2.0 compatible) carries both data and power over one cable, with a typical draw of 1.5 W at 5 VDC — the lowest of the three models on this sheet. Two bidirectional, non-isolated digital I/O lines (Line 2, Line 5) are available for trigger and synchronization, while gain (0–24 dB) and exposure (23 μs–10 sec) can be set automatically or manually. The C-mount makes lens swaps straightforward, and the camera is directly compatible with USB3 Vision/GenICam software such as the MVS client.
Specifications
| CB Series — Board Level | |
|---|---|
| Model | MV-CB020-60UM-C |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Stacked BSI |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Pixel size | 3.45 μm × 3.45 μm |
| Sensor size | 1/2.53″ |
| Resolution | 1624 × 1240 |
| Max. frame rate | 179.9 fps @ 1624 × 1240 Mono 8 |
| Dynamic range | 68.6 dB |
| SNR | 44.1 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | 23 μs to 10 sec |
| Exposure mode | Off/ Once/ Continuous exposure mode |
| Mono/color | Mono |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | USB 3.0, compatible with USB 2.0 |
| Digital I/O | Bi-directional non-isolated I/O × 2 (Line 2, Line 5) |
| Power supply | USB 3.0 power supply |
| Power consumption | Typ. 1.5 W @ 5 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension (without lens) | 35 mm × 35 mm × 8.6 mm (1.4″ × 1.4″ × 0.3″) |
| Weight | Approx. 30 g (0.07 lb.) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software with USB3 Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | USB3 Vision, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000105018 |
| Status | Available |
Key features
- Supports auto and manual adjustment for gain, exposure control, white balance, LUT, etc.
- Adopts image interpolation algorithm for color camera to have better color correction.
- Power supply and data transmission via USB3.0 interface.
- Compatible with USB3 Vision Protocol, GenICam standard, and the third-party software based on these protocol and standard.
Where it is used
Mono output paired with a standard C-mount suits high-speed lines where contrast and edge detail matter more than color — presence/position checks, dimensional or edge-based measurement, and barcode/2D-code reading on fast-moving parts. With speeds up to 179.9 fps, it is also a fit for counting or triggering scenarios on rapid conveyors.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data