HIKROBOT MV-CB060-10UM-S — Area Scan Cameras
6 MP, Sony IMX178, USB3.0, Mono, M12-mount, 60.9 fps
As the CB family’s M12-mount mono/USB3.0 member, this model shares the same 35×35×8.6 mm board footprint as its C-mount sibling but is slightly heavier due to the M12 mount barrel (approx. 43.5 g versus 30 g). With the Sony® IMX178 mono sensor and USB3.0 interface it reaches 60.9 fps at 3072×2048. Being a housing-free board-level camera, it must be fixed into the customer’s enclosure via the PCB mounting holes; the M12 screw mount pairs directly with compact board-camera lenses.
It is powered from the USB3.0 line at typ. 1.5 W with no separate power supply needed; two bi-directional I/O lines (Line 2, Line 5) support hardware/software triggering and free-run mode. The HDR function combines different exposure/gain settings for scenes with a wide brightness range. USB3 Vision and GenICam compliance let it integrate with the MVS client and compatible third-party software.
Specifications
| CB Series — Board Level | |
|---|---|
| Model | MV-CB060-10UM-S |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX178 |
| Pixel size | 2.4 μm × 2.4 μm |
| Sensor size | 1/1.8″ |
| Resolution | 3072 × 2048 |
| Max. frame rate | 60.9 fps @ 3072 × 2048 Mono 8 |
| Dynamic range | 66 dB |
| SNR | 41.5 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | 8 μs to 1 sec |
| Exposure mode | Off/ Once/ Continuous exposure mode, supports Global Reset and Trigger Rolling |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | USB 3.0 |
| Digital I/O | Bi-directional non-isolated I/O × 2 (Line 2, Line 5) |
| Power supply | USB 3.0 power supply |
| Power consumption | Typ. 1.5 W @ 5 VDC |
| Mechanical | |
| Lens mount | M12-mount |
| Dimension | 35 mm × 35 mm × 8.6 mm (1.4″ × 1.4″ × 0.3″) |
| Weight | Approx. 43.5 g (0.1 lb.) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: -30 °C to 70 °C (-22 °F to 158 °F) |
| Humidity | 20% to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software with USB3 Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | USB3 Vision, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000048854 |
| Status | Available |
Key features
- Compact design for flexible installation.
- Supports auto or manual adjustment of gain, exposure time, and white balance, and manual adjustment of Gamma correction, LUT, etc.
- Supports HDR function with different exposure time and gain.
- Supports hardware trigger, software trigger, free run, etc.
- Compatible with USB3 Vision Protocol, GenICam standard, and the third-party software based on these protocol and standard.
Where it is used
The M12 mount suits compact automation modules, robot end-effectors or devices with limited mounting volume that need an embedded mono imaging solution with small lenses. The mono sensor and 60.9 fps rate are effective for high-speed counting and position/presence checks that don’t need color. HDR support improves image consistency in compact cells with variable lighting.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data