HIKROBOT MV-DV4024-50GM — Area Scan Cameras
12 MP, Sony IMX226, GigE, Mono, 9.7 fps
The MV-DV4024-50GM is a 12 MP, 1/1.7″-format monochrome area-scan camera in the cost-effective GigE line of the CU series, listed with PoE in its product name. Its Sony® IMX226 CMOS sensor operates with a rolling shutter and delivers the 4024 × 3036 frame at 9.7 fps in Mono 8. The 1.85 μm × 1.85 μm pixel size resolves small detail while 40.5 dB SNR and a 70.5 dB dynamic range preserve a wide grey scale in the monochrome image; it is a camera built for high-resolution documentation of stationary objects.
The camera takes C-mount lenses, and the 1/1.7″ sensor format is the key parameter for lens selection. Data travels over Gigabit Ethernet up to 100 meters without a repeater and remains compatible with Fast Ethernet infrastructure; power arrives either via optional PoE on the same cable or as 9–24 VDC on the P7 connector, at a typical 1.78 W at 12 VDC. On P7, the opto-isolated input (Line 0) takes the hardware trigger, the opto-isolated output (Line 1) drives a strobe or PLC signal and the bi-directional Line 2 serves as extra I/O; software trigger and free-run are supported as well. GigE Vision V2.0 and GenICam compliance make it recognizable in standards-based software; the 29 × 29 × 42 mm, roughly 100 g housing is rated IP30.
Specifications
| CU Series — Cost-effective | |
|---|---|
| Model | MV-DV4024-50GM |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX226 |
| Pixel size | 1.85 μm × 1.85 μm |
| Sensor size | 1/1.7″ |
| Resolution | 4024 × 3036 |
| Max. frame rate | 9.7 fps @ 4024 × 3036 Mono 8 |
| Dynamic range | 70.5 dB |
| SNR | 40.5 dB |
| Gain | 0 dB to 20 dB |
| Exposure time | 34 μs to 2 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, PoE is optional |
| Power consumption | Typ. 1.78 W@12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: -30 °C to 70 °C (-22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows XP/7/10, 32/64-bit Linux and 64-bit MacOS |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | GW_000396 |
| Status | Available |
Key features
- Adopts low power consumption design with stable performance.
- Supports auto and manual adjustment of gain, exposure time, etc.
- Supports hardware trigger, software trigger, free run, etc.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
Situations that need a wide field captured at high resolution in a single frame are this model’s natural territory: surface mapping on large sheet metal or glass panels, full-board visual checks of PCB solder joints, and contour measurement of gears and castings. As long as the object is stationary during measurement the rolling shutter is not a constraint; on moving conveyors the part has to be stopped. The 100 m cable reach and PoE option suit permanent installations where the camera is mounted at a hard-to-reach point far from the control room.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data