HIKROBOT MV-CU200-20UM — Area Scan Cameras

20 MP, AR2020, USB3.0, Mono, 18 fps

HIKROBOT MV-CU200-20UM

Status: Available

HIKROBOT part no.: SM000109812

Request a quote and stock check

For 20 MP monochrome imaging over USB3.0 the CU series offers the MV-CU200-20UM. Its 1/1.8″ AR2020 rolling-shutter sensor, with 1.4 μm pixels and 5120 × 3840 resolution, reaches 18 fps in Mono 8, roughly three times the 5.9 fps of the GigE variants on the same sensor. A 39 dB SNR and 61 dB dynamic range, with exposure from 54 μs to 10 sec, preserve fine grayscale detail.

The USB3.0 link is USB2.0-compatible and can power the camera; with a typical 1.8 W draw at 5 VDC most setups need no external supply, though a 9 VDC to 24 VDC input is available. The 6-pin P7 connector provides one opto-isolated input, one opto-isolated output and one bi-directional non-isolated line for trigger and lighting synchronization. At 29 mm × 29 mm × 30 mm and 76 g the body is built for small-space mounting and comes with IP40 protection, a C-mount and USB3 Vision / GenICam compliance.

Specifications

CU Series — Cost-effective
ModelMV-CU200-20UM
Performance
Sensor typeCMOS, rolling shutter
Sensor modelAR2020
Pixel size1.4 μm × 1.4 μm
Sensor size1/1.8″
Resolution5120 × 3840
Max. frame rate18 fps @ 5120 × 3840 Mono 8
Dynamic range61 dB
SNR39 dB
Gain0 dB to 48 dB
Exposure time54 μs to 10 sec
Exposure modeOff/Once/Continuous exposure mode
Mono/colorMono
Pixel formatMono 8/10/10 Packed/12/12 Packed
BinningSupports 1 × 1, 2 × 2, 4 × 4
DecimationNot support
Reverse imageSupports horizontal and vertical reverse image output
Electrical feature
Data interfaceUSB3.0, compatible with USB2.0
Digital I/O6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2).
Power supply9 VDC to 24 VDC, supports USB3.0 power supply
Power consumptionTyp. 1.8 W @ 5 VDC(USB3.0 provides power supply)
Mechanical
Lens mountC-mount
Dimension29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″)
WeightApprox. 76 g (0.2 lb.)
Ingress protectionIP40 (under proper lens installation and wiring)
TemperatureWorking temperature: 0 °C to 50 °C (32 °F to 122 °F)
Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F)
Humidity20% RH to 80% RH (no condensation)
General
Client softwareMVS or third-party software meeting with USB3 Vision Protocol
Operating system32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux
CompatibilityUSB3 Vision, GenlCam
CertificationCE, RoHS, KC
HIKROBOT part no.SM000109812
StatusAvailable

Key features

  • Adopts brand new design to reduce power consumption.
  • Supports auto or manual adjustment of gain, exposure time, manual adjustment of LUT, Gamma correction, etc.
  • Supports customized ROI, horizontal and vertical reverse image output.
  • Adopts compact design for small spatial installation.
  • Compatible with USB3 Vision Protocol, GenICam Standard, and the third-party software based on the protocol and standard.

Where it is used

An 18 fps stream of 20 MP monochrome frames is valuable where a fixed station needs many consecutive high-resolution captures: appearance inspection of semiconductor and electronic parts, measurement of precision molded components, and surface-defect scanning on paper and film. The compact USB camera fits positions close to the PC, such as a robot wrist or an in-cell inspection head. In code-reading and OCR applications that need no color, the high pixel count also allows a wide area to be covered in one frame.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.

Is this camera right for your application?

Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.

Request a quote Other models in the series

The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.

Source: HIKROBOT product data

← CU Series — Cost-effective