HIKROBOT MV-CU013-A0GM V2 — Area Scan Cameras
1.3 MP, 1/2″ CMOS, GigE, Mono, 90.2 fps
MV-CU013-A0GM V2 keeps the 1/2″ global-shutter CMOS, 4.8 μm pixel and 1280 × 1024 resolution of its sibling but is specified at a maximum of 90.2 fps in Mono 8 and a minimum exposure of 11 μs. SNR (40.6 dB), dynamic range (54 dB) and the 0–16 dB gain span are unchanged, while storage temperature is rated up to 80 °C. It remains a 1.3 MP mono GigE camera positioned in the cost-effective CU series.
The data sheet states the link explicitly as 1000 Mbit/s Gigabit Ethernet with fallback to 100 Mbit/s Fast Ethernet, still spanning 100 m without a relay. Power comes from PoE (optional) or 9–24 VDC on the 6-pin P7 connector alongside Line 0 (opto-isolated input), Line 1 (opto-isolated output) and Line 2 (bidirectional, non-isolated); trigger sources include hardware, software and free run, and gain and exposure adjust automatically or manually. Mechanically nothing changes for the integrator: 29 × 29 × 42 mm, about 100 g, C-mount, IP30 with lens fitted, typical 1.8 W at 12 VDC, GigE Vision V2.0 and GenICam compatible.
Specifications
| CU Series — Cost-effective | |
|---|---|
| Model | MV-CU013-A0GM V2 |
| Performance | |
| Sensor type | CMOS, global shutter |
| Pixel size | 4.8 μm × 4.8 μm |
| Sensor size | 1/2″ |
| Resolution | 1280 × 1024 |
| Max. frame rate | 90.2 fps @ 1280 × 1024 Mono 8 |
| Dynamic range | 54 dB |
| SNR | 40.6 dB |
| Gain | 0 dB to 16 dB |
| Exposure time | 11 μs to 10 sec |
| Mono/color | Mono |
| Exposure mode | Off/Once/Continuous exposure mode |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, PoE is optional |
| Power consumption | Typ. 1.8 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000105982 |
| Status | Available |
Key features
- Adopts low power consumption design with stable performance.
- Supports auto or manual adjustment of gain, exposure time etc.
- Supports hardware trigger, software trigger, free run, etc.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
Typical duties are counting and gap detection on conveyors, checking that caps, seals or inserts are present, and verifying fill level or component seating where a monochrome image at roughly 90 fps is more than sufficient. The 11 μs exposure floor still freezes fast-moving items under strobed lighting, and the 80 °C storage rating gives headroom for equipment shipped or stored in hot conditions. Networked PoE installation makes it easy to add the camera to an existing line controller cabinet.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data