HIKROBOT MV-CU013-A0GM — Area Scan Cameras
1.3 MP, 1/2″ CMOS, GigE, Mono, 91.3 fps
The MV-CU013-A0GM is the 1.3 MP monochrome GigE member of HIKROBOT’s cost-effective CU series. Its 1/2″ global-shutter CMOS with 4.8 μm × 4.8 μm pixels delivers 1280 × 1024 frames at up to 91.3 fps in Mono 8, with a 40.6 dB SNR and 54 dB dynamic range. Exposure can be set anywhere from 10 μs to 10 s, and gain from 0 to 16 dB.
Image data travels over Gigabit Ethernet (Fast Ethernet compatible) for up to 100 m without a repeater, and the camera can be powered either via PoE or from 9–24 VDC through the 6-pin P7 connector, which also carries one opto-isolated input (Line 0), one opto-isolated output (Line 1) and a non-isolated bidirectional line (Line 2). Hardware trigger, software trigger and free-run modes are available, and gain, exposure, LUT and gamma can be tuned automatically or by hand. Typical draw is only 1.8 W at 12 VDC in a 29 × 29 × 42 mm C-mount housing of about 100 g; the unit is GigE Vision V2.0 and GenICam compliant, so it works with third-party software built on those standards.
Specifications
| CU Series — Cost-effective | |
|---|---|
| Model | MV-CU013-A0GM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Pixel size | 4.8 μm × 4.8 μm |
| Sensor size | 1/2″ |
| Resolution | 1280 × 1024 |
| Max. frame rate | 91.3 fps@1280 × 1024 Mono 8 |
| Dynamic range | 54 dB |
| SNR | 40.6 dB |
| Gain | 0 dB to 16 dB |
| Exposure time | 10 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, PoE is optional |
| Power consumption | Typ. 1.8 W@12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: -30 °C to 70 °C (-22 °F to 158 °F) |
| Humidity | 20% to 95% RH, non-condensing |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows XP/7/10, 32/64-bit Linux and 64-bit MacOS |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000043077 |
| Status | Available |
Key features
- Adopts low power consumption design with stable performance.
- Supports auto or manual adjustment of gain, exposure time, and manual adjustment of LUT, Gamma correction, etc.
- Supports hardware trigger, software trigger, free run, etc.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
A 1.3 MP mono camera running above 90 fps is well matched to presence, position and orientation checks on packaging and assembly lines, where parts pass quickly and only shape or edge information is needed. The 4.8 μm pixels gather light efficiently, which helps in barcode and Data Matrix reading or OCR on labels under modest illumination. With PoE and a single cable run of up to 100 m it also fits distributed stations across a plant floor.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data