HIKROBOT MV-CT2CG0200/R/16LC/WN — Area Scan Cameras

The HIKROBOT MV-CT2CG0200/R/16LC/WN is the GigE MAX model of the third-generation CT series area scan camera family. Its 1″ Sony IMX183 rolling shutter CMOS sensor, with a 2.4 µm pixel size, produces 5472 × 3648 resolution (20.0 MP) color images, reaching 5.9 fps in standard mode and up to 22.3 fps with lossless compression enabled. A 65.9 dB dynamic range and 41.3 dB signal-to-noise ratio, combined with a 0-24 dB gain range, help preserve detail in high-resolution images. Exposure time is adjustable from 46 µs to 2.78 s, a wide range that allows detailed inspection under varying lighting conditions.

The camera transfers data over a 1000 Mbit/s Gigabit Ethernet interface, compatible with 100 Mbit/s Fast Ethernet, through an 8-pin M12 X-Code waterproof connector; a separate 8-pin M12 X-Code waterproof connector is used for control signals. Powered from 9-24 VDC and PoE-capable, it typically draws 2.3 W at 24 VDC. The 42 × 42 × 43 mm body, weighing approximately 120 g, reaches IP67 protection when the lens, housing and cables are correctly installed, and operates between -30 °C and 60 °C. Support for GigE Vision V2.0 and GenICam ensures compatibility with third-party software. This SKU comes with a 16 mm liquid lens and white base light source integrated at the C-Mount interface, an integrated optic/light package that simplifies installation into a near ready-to-use setup.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• 100 metre cable reach. The Gigabit Ethernet interface transmits up to 100 metres without a relay; PoE allows power over a single cable.
• Open standard compliance. Works seamlessly with the GigE Vision V2.0 protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a fully waterproof M12 X-Code connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology.

Where it is used

The 20.0 MP high resolution suits detailed in-line inspection and measurement tasks where small defects need to be distinguished. The rolling shutter sensor and 5.9-22.3 fps frame rate make the camera suitable for medium-speed lines requiring high-resolution imaging. The integrated lens and light source simplify setting up compact imaging stations without separate lighting and optics selection. IP67 protection and waterproof connectors support reliable operation in dusty or humid environments.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.