← CT Series Industrial Camera
HIKROBOT MV-CT0CU0200/R/NN/NN
20MP Area Scan Camera, 3rd Gen., USB3.0, Color, BASE
Key Features
- The devices with PRO version and MAX version support waterproof connector.
- The devices with PRO version and MAX version adopt precision temperature control design for fast heat balance.
- The color devices with PRO version and MAX version support auto color correction based on multi-spectral fusion technology.
- The device with MAX version integrates lens and light source, enabling lens focusing and light source control.
- Adopts Type-C interface and supports higher transmission bandwidth.
- Compatible with USB3 Vision Protocol, GenlCam Standard, and the third-party software based on the protocol and standard.
Detailed Parameters
| Model | |
| Product Model | MV-CT0CU0200/R/NN/NN |
| Type | 20MP Area Scan Camera, 3rd Gen., USB3.0, Color, BASE |
| Performance | |
| Sensor Type | CMOS, rolling shutter |
| Sensor Model | Sony IMX183 |
| Sensor Size | 1" |
| Pixel Size | 2.4 μm × 2.4 μm |
| Resolution | 5472 × 3648 |
| Dynamic Range | 66.1 dB |
| SNR | 41.3 dB |
| Gain | 0 dB to 24 dB |
| Exposure Time | 14 μs to 0.86 sec |
| Exposure Mode | Off/Once/Continuous exposure mode, supports Trigger Width and Trigger Controlled |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse Image | Supports horizontal and vertical reverse image output |
| Electrical Features | |
| Data Interface | USB 3.0, compatible with USB 2.0 |
| Data Interface Type | Type-C interface |
| Control Interface | BASE: Not supported |
| Digital I/O | 8-pin M8 A-Code aviation connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power Supply | 9 VDC to 24 VDC, supports USB 3.0 power supply |
| Mechanical | |
| Lens Mount | C-mount |
| Dimension | BASE: 29 mm × 29 mm × 30 mm (1.1" × 1.1" × 1.2") |
| Weight | BASE: Approx. 72 g (0.2 lb.) |
| Ingress Protection | BASE: IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |