HIKROBOT MV-LE200-48W24-2D — Lighting

2-channel, 48 W/24 V digital light controller supporting continuous and strobe modes via panel button or serial-port software.

HIKROBOT MV-LE200-48W24-2D

Status: Available

HIKROBOT part no.: SM000039381

Request a quote and stock check

As the entry point of the LE200 family, the MV-LE200-48W24-2D drives lights digitally with constant voltage; lighting can run continuously or in strobe mode, set either from panel buttons or via DB9F serial-port software. Each channel outputs up to 2 A, with a 125 kHz PWM frequency and sub-10 μs response time suited to fast triggering; it carries 2 opto-isolated inputs and 2 opto-isolated outputs. Naturally cooled, it stays compact at 90×54.1×139.5 mm and 188 g.

Specifications

Light Controllers
ModelMV-LE200-48W24-2D
Performance
Drive modeDigital, constant voltage
Lighting modeContinuous, strobe
PWM frequency125 kHz
Strobe overdriveNot support
Channel2-channel
Dimming modeControl panel (via pressing button), software (serial port)
Brightness level0 to 255
Lighting response time< 10 μs
Trigger modeExternal trigger and internal trigger
Communication protocolSerial
Applicable productRing light, bar light, flat light, coaxial light, etc.
Electrical feature
Input voltage24 VDC
Input current2.5 A
Output voltage24 VDC
Output currentMax. 2 A
Output powerMax. 48 W
Output current for each channelMax. 2 A
Trigger inHigh level 4.5 VDC to 24 VDC, low level 0 VDC to 2 VDC
Trigger outHigh level 10 VDC to 24 VDC, low level 0 VDC to 2 VDC
Mechanical
Power supply interface5.08 mm × 2 terminal block
Console interfaceDB9F serial port
Digital I/OOpto-isolated input × 2, opto-isolated output × 2
Lighting output connectorSMR-03V-BC
Dimension90 mm × 54.1 mm × 139.5 mm (3.5″ × 2.1″ × 5.5″)
Shell materialPlastic
WeightApprox. 188 g (0.4 lb.)
TemperatureWorking temperature: 0 °C to 40 °C (32 °F to 104 °F)
Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F)
Humidity20% RH to 85% RH (no condensation)
Ingress protectionIP30
Cooling modeNatural cooling
General
CertificationCE, KC
HIKROBOT part no.SM000039381
StatusAvailable

Key features

  • Supports different control modes of light source, including control panel and software.
  • Supports using serial port or network interface to set parameters and manage the device.
  • Provides multiple I/O interfaces for external trigger.
  • Supports installation via slide rail or screw hole.
  • Supports overcurrent, overload, short circuit protection.

Where it is used

Used in standard machine-vision setups running ring, bar, flat, or coaxial light sources on 2 channels in continuous or strobe mode.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.

Is this lighting product right for your application?

Let us determine light source, controller and mounting compatibility together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.

Request a quote Other models in the series

The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.

Source: HIKROBOT product data

← Light Controllers

Other models in this series