HIKROBOT MV-LE200-200W24-4TD — Lighting

4-channel, 200 W/24 V digital light controller — the highest-output network-enabled model in the LE200 family.

HIKROBOT MV-LE200-200W24-4TD

Status: Available

HIKROBOT part no.: SM000039380

Request a quote and stock check

Sharing the same network (RJ45/UDP) and serial (DB9F) control infrastructure as the 120 W model, this unit pushes output to 200 W and total current to 8.3 A, while the per-channel limit stays at 3 A. It’s built with a wide 100-240 VAC input range, fan cooling, 4 opto-isolated inputs, and 4 opto-isolated outputs. At 130×83.8×169.5 mm and 733 g, it shares its enclosure with the 120 W model.

Specifications

Light Controllers
ModelMV-LE200-200W24-4TD
Performance
Drive modeDigital, constant voltage
Lighting modeContinuous, strobe
PWM frequency125 kHz
Strobe overdriveNot support
Channel4-channel
Dimming modeControl panel (via pressing button), software (serial port or network interface)
Brightness level0 to 255
Lighting response time< 10 μs
Trigger modeExternal trigger and internal trigger
Communication protocolUDP, Serial
Applicable productRing light, bar light, flat light, coaxial light, etc.
Electrical feature
Input voltage100 VAC to 240 VAC, 50 Hz/60 Hz
Input current1.8 A (115 VAC), 1A (230 VAC)
Output voltage24 VDC
Output currentMax. 8.3 A
Output powerMax. 200 W
Output current for each channelMax. 3 A
Trigger inHigh level 4.5 VDC to 24 VDC, low level 0 VDC to 2 VDC
Trigger outHigh level 10 VDC to 24 VDC, low level 0 VDC to 2 VDC
Mechanical
Power supply interfaceC13 220 VAC interface
Console interfaceRJ45 network interface, DB9F serial port
Digital I/OOpto-isolated input × 4, opto-isolated output × 4
Lighting output connectorSMR-03V-BC
Dimension130 mm × 83.8 mm × 169.5 mm (5.1″ × 3.3″ × 6.7″)
Shell materialPlastic
WeightApprox. 733 g (1.6 lb.)
TemperatureWorking temperature: 0 °C to 40 °C (32 °F to 104 °F)
Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F)
Humidity20% RH to 85% RH (no condensation)
Ingress protectionIP30
Cooling modeFan cooling
General
CertificationCE, KC
HIKROBOT part no.SM000039380
StatusAvailable

Key features

  • Supports different control modes of light source, including control panel and software.
  • Supports using serial port or network interface to set parameters and manage the device.
  • Provides multiple I/O interfaces for external trigger.
  • Supports installation via slide rail or screw hole.
  • Supports overcurrent, overload, short circuit protection.

Where it is used

Preferred for 4-channel lines needing higher total power where centralized network management is required.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.

Is this lighting product right for your application?

Let us determine light source, controller and mounting compatibility together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.

Request a quote Other models in the series

The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.

Source: HIKROBOT product data

← Light Controllers

Other models in this series