TELEMECANIQUE XS4P30PA340 — Non-Flush Cylindrical Inductive Sensors
Telemecanique XS4P30PA340: Inductive proximity sensor, M30, non-flush, Sn 15 mm, PNP 1 NO, 2 m cable, 12–24 V DC.
Status: In production
Brand: Telemecanique
Product: Inductive proximity sensor, M30, non-flush
Sensing distance (Sn): 15 mm
Output: PNP, 1 NO
Connection: 2 m cable
Supply: 12–24 V DC
Degree of protection: IP68
The Telemecanique XS4P30PA340 is an XS4-family inductive proximity sensor of the XS range with a cylindrical M30 x 1.5 threaded body. It is non-flush mountable; in a metal support the data sheet requires d ≥ 90 mm and h ≥ 30 mm. Nominal sensing distance (Sn) is 15 mm, with an operating zone of 0–12 mm. Enclosure is PPS plastic, sensing face PPS; length 43 mm, threaded length 32 mm, net weight 0.12 kg. Differential travel is 1–15 % of the effective sensing distance; switching frequency is up to 1000 Hz.
Supply is 12–24 V DC (limits 10–36 V DC) with reverse polarity protection. The PNP 1 NO output switches up to 200 mA with overload and short-circuit protection; closed-state voltage drop is below 2 V and no-load current consumption is at most 10 mA. Connection is via a 2 m PVC-insulated 3 x 0.34 mm² cable; a yellow LED shows the output state. Degree of protection is IP68 double insulation (IEC 60529); operating temperature is -25 to +70 °C. Certifications: UL, Ecolab and CSA.
Telemecanique XS4P30PA340 technical specifications
| General | |
|---|---|
| Series | XS4, general purpose |
| Body design | Cylindrical, M30 x 1.5 thread |
| Mounting | Non-flush mountable |
| Detection | |
| Nominal sensing distance (Sn) | 15 mm |
| Operating zone (Sa) | 0–12 mm |
| Differential travel | 1–15 % of effective sensing distance (Sr) |
| Switching frequency | ≤ 1000 Hz |
| Electrical characteristics | |
| Rated supply voltage | 12–24 V DC with reverse polarity protection |
| Supply voltage limits | 10–36 V DC |
| Current consumption (no-load) | ≤ 10 mA |
| Voltage drop (closed state) | Below 2 V |
| Delays (maximum) | First-up 10 ms; response 0.3 ms; recovery 0.7 ms |
| Outputs and indicators | |
| Output type | PNP, 1 NO, DC |
| Wiring technique | 3-wire |
| Switching capacity | ≤ 200 mA with overload and short-circuit protection |
| Status LED | Output state: 1 yellow LED |
| Mechanical and connection | |
| Electrical connection | 2 m cable |
| Cable | 3 x 0.34 mm², PVC insulation |
| Enclosure material | PPS plastic |
| Sensing face material | PPS |
| Length / threaded length | 43 mm / 32 mm |
| Net weight | 0.12 kg |
| Minimum mounting distances | Side by side ≥ 60 mm; face to face ≥ 180 mm; facing a metal object ≥ 45 mm; mounted in a metal support d ≥ 90 mm, h ≥ 30 mm |
| Environmental | |
| Degree of protection | IP68 double insulation (IEC 60529) |
| Operating temperature | -25 to +70 °C |
| Storage temperature | -40 to +85 °C |
| Vibration resistance | 25 gn, amplitude ±2 mm (f = 10–55 Hz), IEC 60068-2-6 |
| Shock resistance | 50 gn for 11 ms, IEC 60068-2-27 |
| Marking and certifications | CE; UL, Ecolab, CSA |
Key features
- Sn 15 mm, non-flush mountable, M30 x 1.5 thread
- PNP 1 NO output, up to 200 mA, overload and short-circuit protected
- 12–24 V DC supply with reverse polarity protection
- PPS plastic enclosure, PPS sensing face
- Degree of protection IP68
- 2 m PVC cable, yellow status LED
XS4P30PA340 ordering codes
| Part number | Description |
|---|---|
| XS4P30PA340 | PNP, 1 NO, 2 m cable |
| XS4P30NA340 | NPN, 1 NO, 2 m cable |
| XS4P30PB340 | PNP, 1 NC, 2 m cable |
| XS4P30PA340D | PNP, 1 NO, M12 connector |
XS4P30PA340 accessories
Accessories listed by the manufacturer for this product (ordered separately):
| Part number | Description |
|---|---|
| XSZB130 | Fixing clamp for Ø30 mm XS inductive sensors, plastic, with indexing |
| XSZBS30 | Mounting bracket for Ø30 mm XS inductive sensors, stainless steel |
Other Telemecanique Non-Flush Cylindrical Inductive Sensors
- TELEMECANIQUE XS212BLPAL2 — Inductive proximity sensor, M12, non-flush
- TELEMECANIQUE XS218BLPAM12 — Inductive proximity sensor, M18, non-flush
- TELEMECANIQUE XS218B4PAM12 — Inductive proximity sensor, M18, non-flush
- TELEMECANIQUE XS230BLPAM12 — Inductive proximity sensor, M30, non-flush
- TELEMECANIQUE XS612B4PAL2 — Inductive proximity sensor, M12, non-flush
- TELEMECANIQUE XS618B4NAM12 — Inductive proximity sensor, M18, non-flush
- TELEMECANIQUE XS630B4PAM12 — Inductive proximity sensor, M30, non-flush
- TELEMECANIQUE XS4P08PA340 — Inductive proximity sensor, M8, non-flush
- TELEMECANIQUE XS4P12PA340 — Inductive proximity sensor, M12, non-flush
- TELEMECANIQUE XS4P18PA340 — Inductive proximity sensor, M18, non-flush
Models from other brands: Non-Flush Cylindrical Inductive Sensors
Is this inductive sensor right for your application?
Share the metal target to be detected (material, size), the required sensing distance, the mounting type (flush / non-flush), ambient conditions (oil, coolant, washdown, temperature) and your PLC input (PNP/NPN, NO/NC); let’s select the right inductive sensor and connection cable together.
Request a quote Back to Non-Flush Cylindrical Inductive Sensors
All product specifications are subject to change without notice. Source: Telemecanique Sensors, XS4P30PA340 product data sheet (https://downloads.telemecaniquesensors.com/dam/datasheets/en/XS4P30PA340_EN.pdf, 30 July 2024); reference page https://www.telemecaniquesensors.com/global/en/product/reference/XS4P30PA340; XS catalogue TESEBRO000040EN (accessed 28 September 2026).