HIKROBOT MV-ID3016PM-15M-WBN — Fixed Code Readers

ID3000 series smart code reader, 1408 × 1200 resolution, 15 mm focal length

HIKROBOT MV-ID3016PM-15M-WBN

Status: Available

Product family: ID3000 Series Industrial Code Reader

HIKROBOT part no.: SM000032451

Series: ID3000

Request a quote and stock check

As the longest-focal-length member of the ID3016PM trio, MV-ID3016PM-15M-WBN pairs a 15 mm focal length with the same 1408×1200 resolution for scenarios requiring the greatest standoff distance from the part. Read speed (84 codes/sec) and frame rate (60 fps) match the rest of the family, and the top ring light keeps operating status visible even at this longer mounting distance.

The modularized light source lets the illumination module be swapped for one better suited to the increased working distance, while the dual-side result indicators keep OK/NG outcomes visible from a distance too. The waterproof debug button still allows manual triggering and testing even where physical access to the unit is limited, and multiple I/O interfaces complete integration with the line control system.

Specifications

ID3000 — Cost-effective
ModelMV-ID3016PM-15M-WBN
Performance
Symbologies1D codes: Code 39, Code 93, Code 128, CodaBar, EAN 8, EAN 13, UPCA, UPCE, ITF 14, ITF 25, Matrix 25, MSI, China Post, Code 11, Industrial 25, and Pharmacode
2D matrix codes: QR Code (GS1-QR included), Data Matrix (GS1-DM included), MicroQR, AZTEC, HanXin, Maxi code
Stacked codes: PDF417, MicroPDF417
Max. frame rate60 fps
Max. reading speed84 codes/sec
Sensor typeGlobal shutter, mono, 1/2.9″, 3.45 μm × 3.45 μm
Resolution1408 × 1200
Exposure time16 μs to 1 sec
Gain0 dB to 45 dB
Electrical feature
Data interfaceFast Ethernet (100 Mbit/s)
Communication protocolSmartSDK, TCP Client, TCP Server, Serial, FTP, Profinet, Ethernet/IP, MELSEC/SLMP, ModBus, UDP, Fins, Modbus RTU, KV
Digital I/OV3.0: 17-pin M12 connector provides power and I/O, including isolated input (LineIn 0/1/2) × 3, isolated output (LineOut 3/4/5) × 3, RS-232 × 1. Supports device triggering via pressing button on top.
V2.0: 17-pin M12 connector provides power and I/O, including non-isolated input (LineIn 0/1/2) × 3, non-isolated output (LineOut 3/4/5) × 3, RS-232 × 1. Supports device triggering via pressing button on top.
Power supply24 VDC
Power consumptionAvg.: 9 W @ 24 VDC (light source enabled)
Max.: 48 W @ 24 VDC (light source enabled)
Mechanical
Focal length15 mm
Field of view18° (H) × 13° (V)
Lens mountM12-mount, mechanical focus supported
Lens capTransparent lens cap by default. Fully-polarized lens cap is optional.
Light sourceWhite light by default. Red/blue/IR light is optional.
IndicatorPower indicator (PWR), network indicator (LNK), status indicator (STS), result indicator (OK/NG)
Shell materialADC12
Dimension65.2 mm × 65.2 mm × 47 mm (2.6″ × 2.6″ × 1.9″)
WeightApprox. 280 g (0.6 lb.)
Ingress protectionIP67 (under proper installation of waterproof lens cap)
TemperatureWorking temperature: 0 °C to 50 °C (32 °F to 122 °F)
Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F)
Humidity20% RH to 95% RH (no condensation)
Vibration resistanceDevice only: 10 Hz to 55 Hz, 1.5 mm full amplitude, 2 hours per axis (X/Y/Z) (IEC 60068-2-6:2007\GB/T 2423.10-2019)
Shock resistanceDevice only, 30 g / 11 ms, half-sine wave, 500 shocks per axis (6 directions) (IEC 60068-2-27\GB/T 2423.5-2019)
General
Client softwareIDMVS
CertificationCE, RoHS, KC
Product identity
Product familyID3000 Series Industrial Code Reader
SeriesID3000
HIKROBOT part no.SM000032451
StatusAvailable

Key features

  • Adopts built-in deep learning algorithm to read codes with good robustness.
  • Adopts multiple I/O interfaces for input and output signals.
  • Supports waterproof debugging button, and manual triggering.
  • Adopts ring light on the top for viewing operation status.
  • Adopts result indicator on both sides for viewing OK/NG code reading status.
  • Adopts modularized light source design and easy to replace.

Where it is used

The 15 mm focal length suits stations where safety fencing, robot arms, or a wide conveyor span prevent mounting the reader close to the part. Remote visibility from the ring light and side indicators helps operators track status on tall, wide production floors. It’s a candidate for final-check points before packaging or palletizing where the reader sits off to the side of the line.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.

Is this code reader right for your application?

Let us determine code type, reading distance, field of view and communication together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.

Request a quote Other models in the ID3000 series

The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.

Source: HIKROBOT product data

← ID3000 Series — Cost-Effective Smart Code Reader

Other models in this series