HIKROBOT MV-CT1CG0200/R/NN/NN — Area Scan Cameras

The HIKROBOT MV-CT1CG0200/R/NN/NN is the GigE-interface PRO model in the third-generation CT series of area scan cameras. Its 1″ optical format Sony IMX183 rolling shutter CMOS sensor, with a 2.4 µm × 2.4 µm pixel size, delivers 5472 × 3648 resolution (20.0 MP) color images. The camera reaches up to 5.9 fps in standard mode and up to 22.3 fps with lossless compression enabled. A 65.9 dB dynamic range and 41.3 dB signal-to-noise ratio preserve detail richness in high-resolution imaging. Gain is adjustable from 0 dB to 24 dB, and exposure time from 46 µs to 2.78 s; this wide range allows flexible configuration in both low-light and fast-motion scenes. Thanks to its high pixel count, the camera is suitable for applications requiring fine detail discrimination across a wide field of view.

The MV-CT1CG0200/R/NN/NN transmits data over a Gigabit Ethernet (1000 Mbit/s) interface, compatible with Fast Ethernet (100 Mbit/s), through an 8-pin M12 X-Code waterproof connector. There is no separate control connector; I/O signals are handled over the data interface. The camera can be powered with 9–24 VDC and also supports PoE, with typical power consumption of 2 W at 12 VDC. Measuring 29 mm × 29 mm × 42 mm and weighing approximately 124 g, the housing reaches IP67 protection when the lens, enclosure and cables are correctly installed, and operates between -30 °C and 60 °C. As a PRO-series feature it offers a waterproof M12 X-Code connector and precise temperature control. It complies with GigE Vision V2.0 and GenICam standards and uses a C-mount lens connection.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• 100 metre cable reach. The Gigabit Ethernet interface transmits up to 100 metres without a relay; PoE allows power over a single cable.
• Open standard compliance. Works seamlessly with the GigE Vision V2.0 protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a fully waterproof M12 X-Code connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology.

Where it is used

The 20.0 MP resolution and wide pixel array give an advantage in high-resolution inspection tasks that require resolving fine detail across a large field of view. IP67 protection and the waterproof M12 connector make on-site installation possible in dusty or wet environments. The frame rate, reaching 22.3 fps with lossless compression, sustains high-resolution imaging without losing speed. The wide exposure range (46 µs–2.78 s) allows adjustable image capture under variable lighting conditions. PoE support offers practicality in installations where cabling needs to be simplified.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.