HIKROBOT MV-CT1CG0120/R/NN/NN — Area Scan Cameras

The HIKROBOT MV-CT1CG0120/R/NN/NN is the GigE-interface PRO model in the third-generation CT series area scan camera family. Its 1.1″ optical format global shutter stacked BSI CMOS sensor, with a 3.45 µm × 3.45 µm pixel size, produces color images at 4096 × 3000 resolution, reaching up to 9.9 fps in standard mode and up to 23.9 fps with lossless compression enabled (in Bayer GB 8 format). A 67.2 dB dynamic range and 44.2 dB signal-to-noise ratio preserve detail under varying lighting conditions. Gain is adjustable from 0 dB to 12 dB. Exposure time ranges from 10 µs to 19 µs in ultra-short exposure mode and from 20 µs to 10 s in standard exposure mode. The global shutter architecture fixes moving objects in place without distortion. The compact 29 × 29 × 42 mm housing and approximately 124 g weight suit the camera to a range of mounting points.

The camera communicates over a 1000 Mbit/s Gigabit Ethernet data interface and is also compatible with 100 Mbit/s Fast Ethernet; the connection is made through an 8-pin M12 X-Code waterproof connector. There is no separate control connector; triggering and I/O functions are handled over the data interface. Power can be supplied in the 9–24 VDC range and PoE is supported; typical power consumption is 1.9 W at 12 VDC. The IP67 rating provides resistance to dust and water ingress when the lens, housing, and cables are correctly installed, and allows operation between -30 °C and 60 °C. The PRO version combines the waterproof M12 X-Code connector with precise temperature control. The camera complies with the GigE Vision V2.0 and GenICam standards.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• 100 metre cable reach. The Gigabit Ethernet interface transmits up to 100 metres without a relay; PoE allows power over a single cable.
• Open standard compliance. Works seamlessly with the GigE Vision V2.0 protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a fully waterproof M12 X-Code connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology.

Where it is used

With a 4096 × 3000 resolution, among the highest in this group, the camera resolves very fine detail over a wide field of view, making it suitable for high-resolution measurement and in-line inspection tasks. A frame rate of up to 23.9 fps with lossless compression, and an exposure time as short as 10 µs in ultra-short exposure mode, further help preserve detail on moving targets. The IP67 rating and -30 °C to 60 °C operating range support reliable use in demanding environments.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.