HIKROBOT MV-CT2CG0120/G/16LC/WN — Area Scan Cameras

The HIKROBOT MV-CT2CG0120/G/16LC/WN is the GigE-interface MAX model of the third-generation CT series area scan camera family. Fitted with a global shutter stacked BSI CMOS sensor in a 1.1″ optical format with 3.45 µm × 3.45 µm pixels, it delivers 4096 × 3000 (12.0 MP) color resolution at up to 9.9 fps in standard mode, rising to 23.9 fps with lossless compression enabled. A 67.2 dB dynamic range and 44.2 dB signal-to-noise ratio preserve detail under varying lighting conditions. Gain is adjustable from 0 dB to 12 dB, with exposure time ranging from 10 µs to 19 µs in ultra-short exposure mode or 20 µs to 10 s in standard exposure mode.

The camera provides Gigabit Ethernet (1000 Mbit/s, compatible with 100 Mbit/s) data connectivity through an 8-pin M12 X-Code waterproof connector, plus a separate 8-pin M12 A-Code waterproof control connector. It runs on 9–24 VDC with PoE support, drawing a typical 2 W at 24 VDC. Housing dimensions are 42 mm × 42 mm × 43 mm at approximately 120 g, reaching IP67 protection when the lens, enclosure and cables are correctly installed, and operating across -30 °C to 60 °C. The camera complies with GigE Vision V2.0 and GenICam standards. This C-Mount SKU ships bundled with a 16 mm liquid lens and a white base light source — the integrated optic/light package that defines the MAX tier comes factory-ready on this model.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• 100 metre cable reach. The Gigabit Ethernet interface transmits up to 100 metres without a relay; PoE allows power over a single cable.
• Open standard compliance. Works seamlessly with the GigE Vision V2.0 protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a fully waterproof M12 X-Code connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology.

Where it is used

A standard frame rate of 9.9 fps, rising to 23.9 fps with lossless compression, combined with 4096 × 3000 resolution, makes this the highest-resolution model in the series, suited to wide-area color inspection tasks needing fine detail. The bundled 16 mm lens and white light source allow rapid setup without separate optics selection, while the ultra-short exposure time reduces blur on moving objects, giving an advantage in positioning and counting tasks. IP67 protection adds suitability for dusty or wet environments.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.