HIKROBOT MV-CT2CG0060/R/16LC/WN — Area Scan Cameras

The HIKROBOT MV-CT2CG0060/R/16LC/WN is the GigE-interface MAX model of the third-generation CT series area scan camera family. Fitted with a rolling shutter Sony IMX178 sensor in a 1/1.8″ optical format with 2.4 µm × 2.4 µm pixels, it delivers 3072 × 2048 (6.0 MP) color resolution at up to 19.5 fps in standard mode, rising to 40 fps with lossless compression enabled. A 71.3 dB dynamic range and 41.3 dB signal-to-noise ratio preserve detail under varying lighting conditions. Gain is adjustable from 0 dB to 24 dB, with exposure time ranging from 25 µs to 3.1 s.

The camera provides Gigabit Ethernet (1000 Mbit/s, compatible with 100 Mbit/s) data connectivity through an 8-pin M12 X-Code waterproof connector, and the control connector is likewise an 8-pin M12 X-Code waterproof type. It runs on 9–24 VDC with PoE support, drawing a typical 1.7 W at 24 VDC. Housing dimensions are 42 mm × 42 mm × 43 mm at approximately 120 g, reaching IP67 protection when the lens, enclosure and cables are correctly installed, and operating across -30 °C to 60 °C. The camera complies with GigE Vision V2.0 and GenICam standards. This C-Mount SKU ships bundled with a 16 mm liquid lens and a white base light source — the integrated optic/light package that defines the MAX tier comes factory-ready on this model.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• 100 metre cable reach. The Gigabit Ethernet interface transmits up to 100 metres without a relay; PoE allows power over a single cable.
• Open standard compliance. Works seamlessly with the GigE Vision V2.0 protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a fully waterproof M12 X-Code connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology.

Where it is used

A standard frame rate of 19.5 fps, rising to 40 fps with lossless compression, combined with 3072 × 2048 resolution, suits higher-resolution color inspection tasks on a rolling shutter sensor. The bundled 16 mm lens and white light source allow rapid setup without separate optics selection, making the camera suitable for inline visual inspection, positioning, and color-based sorting tasks. IP67 protection adds suitability for dusty or wet environments, and matching M12 X-Code connectors for both data and control simplify cabling.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.