HIKROBOT MV-CT1MG0050/G/NN/NN — Area Scan Cameras

The HIKROBOT MV-CT1MG0050/G/NN/NN is the GigE-interface PRO model in the third-generation CT series of area scan cameras. Its 2/3″ optical format global shutter stacked BSI CMOS sensor, with a 3.45 µm × 3.45 µm pixel size, delivers 2448 × 2048 resolution (5.0 MP) mono images and can reach up to 24.5 fps. A 73.9 dB dynamic range and 42.4 dB signal-to-noise ratio preserve detail even under variable lighting conditions. Gain ranges from 0–12.8 dB in high full-well mode and 0–24 dB in high sensitivity mode; exposure time is adjustable from 45 µs–10 s in high full-well mode and 5 µs–10 s in high sensitivity mode. The global shutter sensor renders moving objects without blur or smear, keeping frames sharp at this higher resolution.

The MV-CT1MG0050/G/NN/NN transfers data over a Gigabit Ethernet (1000 Mbit/s) interface, compatible with Fast Ethernet (100 Mbit/s), through an 8-pin M12 X-Code waterproof connector. There is no separate control connector; I/O signals are handled over the data interface. The camera can be powered with 9–24 VDC and also supports PoE, with typical power consumption of 1.5 W at 24 VDC. Measuring 29 mm × 29 mm × 42 mm and weighing approximately 124 g, the housing reaches IP67 protection when the lens, enclosure and cables are correctly installed, and operates between -30 °C and 60 °C. As a PRO-series feature it offers a waterproof M12 X-Code connector and precise temperature control. It complies with GigE Vision V2.0 and GenICam standards and uses a C-mount lens connection.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• 100 metre cable reach. The Gigabit Ethernet interface transmits up to 100 metres without a relay; PoE allows power over a single cable.
• Open standard compliance. Works seamlessly with the GigE Vision V2.0 protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a fully waterproof M12 X-Code connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology. (This model is mono; the feature applies to its colour counterpart.)

Where it is used

The 5.0 MP resolution and 2/3″ optical format suit measurement and positioning applications that need detail across a wide field of view. The dual gain mode allows image quality to be optimized for different lighting conditions. The global shutter sensor suits inline inspection tasks that require imaging moving objects without distortion. IP67 protection and the waterproof M12 connector make on-site installation possible in dusty or humid environments. PoE support offers practicality in installations where cabling needs to be simplified.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.