HIKROBOT MV-CT0MG0050/G/NN/NN — Area Scan Cameras

The HIKROBOT MV-CT0MG0050/G/NN/NN is the GigE-interface BASE model in the third-generation CT series of area scan cameras. Its 2/3″ global shutter stacked BSI CMOS sensor, with a 3.45 µm pixel size, delivers 2448 × 2048 (5.0 MP) mono images at up to 24.5 fps. A 73.9 dB dynamic range and 42.4 dB signal-to-noise ratio help preserve detail in scenes with wide brightness variation. The camera offers 0 dB – 12.8 dB gain in high full-well mode and 0 dB – 24 dB gain in high sensitivity mode, with exposure time ranging from 45 µs – 10 s in high full-well mode and 5 µs – 10 s in high sensitivity mode. This dual-mode design allows flexible configuration for different lighting and speed requirements. The C-Mount lens interface allows flexibility across different optical configurations.

The camera communicates over a Gigabit Ethernet interface (1000 Mbit/s), backward compatible with 100 Mbit/s Fast Ethernet, connected via an RJ45 connector. There is no separate control connector; control functions are handled over the data interface itself. Powered at 9–24 VDC with PoE support, the camera draws a typical 1.5 W at 24 VDC. The 29 × 29 × 42 mm body weighs approximately 65 g. With the lens and cables correctly installed, it reaches IP40 protection, and it operates across an ambient temperature range of −30 °C to 60 °C. Compliance with GigE Vision V2.0 and GenICam standards simplifies integration with third-party machine vision software.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• 100 metre cable reach. The Gigabit Ethernet interface transmits up to 100 metres without a relay; PoE allows power over a single cable.
• Open standard compliance. Works seamlessly with the GigE Vision V2.0 protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a fully waterproof M12 X-Code connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology. (This model is mono; the feature applies to its colour counterpart.)

Where it is used

With frame rates up to 24.5 fps and exposure times as short as 5 µs depending on mode, this camera is useful for medium-speed inline inspection and measurement tasks. Its 5.0 MP resolution and dynamic range of up to 73.9 dB enable detailed inspection over a larger field of view. The GigE interface with PoE support delivers data and power over a single cable across long cable runs, simplifying multi-camera line setups. The global shutter sensor allows distortion-free imaging of moving objects.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.