HIKROBOT MV-CT2MG0020/G/NN/NN — Area Scan Cameras

The HIKROBOT MV-CT2MG0020/G/NN/NN is the GigE MAX model of the third-generation CT series area scan camera family. Its 1/2.53″ global shutter stacked BSI CMOS sensor, with a 3.45 µm pixel size, produces 1624 × 1240 resolution (2.0 MP) mono images and reaches up to 177.3 fps with lossless compression enabled. A 68.5 dB dynamic range and 44.1 dB signal-to-noise ratio, together with a 0-24 dB gain range, preserve image quality across different lighting conditions. Exposure time is adjustable from 23 µs to 10 s, a wide range that provides flexibility across scenarios from high-speed motion to low light.

The camera transfers data over a 1000 Mbit/s Gigabit Ethernet interface, compatible with 100 Mbit/s Fast Ethernet, through an 8-pin M12 X-Code waterproof connector; a separate 8-pin M12 X-Code waterproof connector is used for control signals. Powered from 9-24 VDC and PoE-capable, it typically draws 1.6 W at 24 VDC. The 42 × 42 × 43 mm body, weighing approximately 120 g, reaches IP67 protection when the lens, housing and cables are correctly installed, and can operate between -30 °C and 60 °C. Support for GigE Vision V2.0 and GenICam ensures compatibility with third-party machine vision software. The standard C-Mount lens interface allows different optics to be fitted depending on the application.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• 100 metre cable reach. The Gigabit Ethernet interface transmits up to 100 metres without a relay; PoE allows power over a single cable.
• Open standard compliance. Works seamlessly with the GigE Vision V2.0 protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a fully waterproof M12 X-Code connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology. (This model is mono; the feature applies to its colour counterpart.)

Where it is used

A frame rate of up to 177.3 fps combined with 2.0 MP resolution suits in-line applications that need high-speed counting and positioning at moderate resolution. The global shutter sensor captures moving objects without distortion, supporting visual inspection tasks directly on the line. Mono imaging is well suited to tasks requiring contrast-based measurement and edge detection. IP67 protection and waterproof M12 connectors support reliable installation in dusty or humid environments.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.